Instruction/ maintenance manual of the product B126-1P0 Tripp Lite
Go to page of 28
1 Owner ’s Manual 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/support Copyright © 2011 T ripp Lite. All rights reserved. HDMI over Cat5 Extenders and Extender/Splitters Extender .
2 P ackage Contents Product F eatures B126-1A1 B126-1A1- WP B126-002 B126-004 B126-1A0 B126-1A0- WP-1 B126-1P0 B126-1P0- WP-1 B126-110 Local Unit (L), Remote Unit (R), or Both (B) B B L L R R R R R Ex.
3 Product F eatures B126-1A1 • HDMIoverCat5ActiveExtenderKit(Box-style) • Extendsa1080i(60Hz)signalupto200ft.
4 Product F eatures B126-004 • 4-PortHDMIoverCat5Extender/SplitterLocalT ransmitterUnit (Box-style) • SplitsanHDMIsignalinto4 • FeaturesanadditionalHDMIport,whichcanbeusedtoconnecta local monitor or to daisy-chain additional B126-004 units.
5 Product F eatures B126-1A0- WP-1 • HDMIoverCat5ActiveExtenderWallplate • WorkswithB126-002andB126-004extender/splitterstoextend a1080i(60Hz)signalupto200ft.fromthesource,ora1080p (60Hz)signalupto150ft.
6 Product F eatures B126-110 • HDMIoverCat5ActiveExtenderRemote/RepeaterUnit(Box-style) • ExtendsandexpandsT rippLiteHDMIoverCat5installation,allowing multiple monitors to be located at different points in a chain of up to 700ft.
7 Mounting Instructions (select models only) The B126-002, B126-004, B126-1A1, B126-1A0 and B126-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods.
OPTIONAL LOCAL MONIT OR LOCAL TRANSMITTER REMO TE RECEIVER Up to 200 ft. at 1080i (60Hz) Up to 150 ft. at 1080p (60Hz) BLU-RA Y 8 Standard Extender Kit Installation Notes: 1) T est to make sure the entire installation works properly before pulling cables through ceilings/walls.
9 Standard Extender Kit Installation 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-1A1or B126-1A1- WPlocalunitusingaT rippLiteP568-SeriesHDMICable.
OPTIONAL LOCAL MONITOR B126-1A1 LOCAL TRANSMITTER B126-1A1 REMOTE RECEIVER B126-110 REMOTE REPEA TER B126-110 REMOTE REPEA TER B126-110 REMOTE REPEA TER Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft.
11 Extender Kit with Remote/R epeater Installation 3 Optional for B126-1A1: Connect a local monitor to the LOCAL HDMIportusingaT rippLiteP568-SeriesHDMICable. 4 Connect the external power supply to the local unit and plug it into a T ripp Lite Surge Suppressor , PDU or UPS.
12 Extender Kit with Remote/R epeater Installation 11 T oaddathirdremote/repeaterunit,repeatsteps8through10. T onishyourinstallationwiththeB126-1A1orB126-1A1- WP remote receiver unit, proceed to step 12.
B126-004 OPTIONAL LOCAL MONITOR BLU-RA Y B126-1P0-WP-1 B126-1A0-WP-1 B126-1P0 B126-1A0 Up to 100 ft. at 1080i (60Hz) Up to 50 ft. at 1080p (60Hz) Up to 200 ft.
14 Standard Extender/Splitter Installation 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-002or B126-004usingaT rippLiteP568-SeriesHDMICable.
15 Standard Extender/Splitter Installation 10 Repeat step 9 for each additional monitor you are connecting. 11 T urnonthepowertotheHDMIsource.TheorangeRJ45LEDs illuminate on the B126-002 and B126-004 to indicate the unit is receiving a signal from the source.
OPTIONAL LOCAL MONITOR B126-004 LOCAL TRANSMITTER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER Up to 175 ft. at 1080i (60Hz) Up to 125 ft.
17 Extender/Splitter with Remote/R epeater Installation 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-002or B126-004usingaT rippLiteP568-SeriesHDMICable.
18 Extender/Splitter with Remote/R epeater Installation 10 Connect the external power supply to the remote/repeater unit and plug it into a T ripp Lite Surge Suppressor , PDU or UPS. The green powerLEDandthegreenRJ45LEDsilluminatetoindicatetheunit is receiving power .
19 Extender/Splitter Daisy-Chain Installation (B126-004 only) Notes: 1) T est to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) T o achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable.
Le vel 1 Le vel 2 Le vel 3 OPTIONAL LOCAL MONIT OR BLU-RA Y 20 Extender/Splitter Daisy-Chain Installation (B126-004 only) 201109206-93-3023-EN.indd 20 10/24/2011 10:01:23 AM.
21 Extender/Splitter Daisy-Chain Installation (B126-004 only) 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-004using aT rippLiteP568-SeriesHDMICable.
22 12 ConnecttheB126-1P0HDMIconnectortoamonitor;or ,connect the B126-1P0- WP-1, B126-1A0 or B126-1A0- WP-1 to a monitor usingaT rippLiteP568-SeriesHDMICable.
23 Extender/Splitter Daisy-Chain with Remote/R epeater Installation (B126-004 only) Notes: 1) T est to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) T o achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable.
OPTIONAL LOCAL MONITOR B126-004 LOCAL TRANSMITTER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER Up to 175 ft. at 1080i (60Hz) Up to 125 ft.
25 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-004using aT rippLiteP568-SeriesHDMICable. 3 ConnecttheLOCALportontheB126-004totheINPUTportona second B126-004 using the included 1-ft.
26 Extender/Splitter Daisy-Chain with Remote/R epeater Installation (B126-004 only) 11 UsingCat5e/6cable,connecttheRJ45OUTPUTportontherst remote/repeaterunittotheRJ45INPUTportonasecondremote/ repeater unit.
27 Extender/Splitter Daisy-Chain with Remote/R epeater Installation (B126-004 only) 20 If necessary , use the Equalization control on the remote/repeater unit(s) and remote receiver unit to adjust the video image. Note: An improper Equalization setting can cause the monitor not to display a picture at all.
28 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/support 201109206•933023 WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste E.
An important point after buying a device Tripp Lite B126-1P0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite B126-1P0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite B126-1P0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite B126-1P0 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite B126-1P0 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite B126-1P0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite B126-1P0.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite B126-1P0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite B126-1P0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
