Instruction/ maintenance manual of the product APS1024INT Tripp Lite
Go to page of 36
1 Copyright © 2000 by Tripp Lite . All rights reserved. 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Owner's Manual APS 912 INT APS 2424 INT APS 1.
2 Intr oduction Congratulations! You’ve purchased the most advanced, feature-rich integrated inverter/battery charger on the market. Your APS provides your equipment with utility-supplied AC power w.
3 Advanced, 3-Stage Battery Charger Y our APS recharges y our batter y faster than conv entional chargers because its three-stage charger profile (Bulk, Absor ption and Float) are optimized, regardless of the type of batter y yo u use (W et or Gel).
4 Safety This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite APS Systems. APS Location W arnings • Install your APS indoors, away from excess moisture or heat, dust or direct sunlight.
5 Configuration CONFIGURA TION DIP SWITCH SETTINGS DIP SWITCH GROUP A (All models) BA TTER Y TYPE / V OL T AGE POINT Using a small tool, set the 4 "Battery Type / Voltage Point" Configuration DIP Switches, Group A (located on the front panel of your APS; see Diagram 1, p.
6 DIP SWITCH GR OUP B (A v ailab le on Select Models) LOAD SHARING/EQ U ALIZE BA TTER Y CHARGE Using a small tool, set the "Load Sharing" Configuration DIP Switches, #1 and #2 of Group B (located on the front panel of your APS; see Diagram 1, p.
7 (See Diagram 2, p. 33). • Install two 8 mm (1/4 in.) fasteners* into a rigid horizontal surface using the measurements in the diagram. (Leave the heads of fasteners raised slightly above the horizontal surface in order to engage the slots in the APS's two front feet.
8 Battery Connection (Standard) 1 . Connect y our APS's positive DC T erminal directly to a fuse. UL requires that you install a recognized UL component fuse block and fuse within 18 inches of the battery. The fuse's rating must equal or exceed the Minimum DC Fuse Rating listed in your APS model's specifications on pages 14-15.
9 A C Input Electrical Connection (All corded models) Plug the line cord into an outlet providing 208V or 230V power at 50 Hz. (A trained technician may be able to convert a unit to receive 60 Hz power. Consult Tripp Lite.) If an adaptor must be used, use one that maintains the APS's ground connection.
10 Switches, Indicator Lights & Other Features (See Diagram 9, p. 35 to locate the following switches, indicator lights and other features.) Switches 1. Operating Mode Switch (All models) This switch selects the APS operating mode (either "AUTO/REMOTE", "OFF" or "CHARGE ONLY").
11 8. "BATTERY HI/MED/LO" (All models) These three lights will turn ON in several sequences to show the approximate charge level and voltage of your connected battery bank and alert you to s.
12 Limited W arranty Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of one year (domestic) or 120 days (export) from the date of initial purchase. Tripp Lite ’ s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
13 Try these remedies for common APS problems before calling for help. Before returning your UPS for service, call Tripp Lite Customer Service at (773) 869-1234 in the USA or at (773) 869-1956 for international customers. SYMPTOM PROBLEMS CORRECTIONS APS does not provide APS not properly connected to Connect APS to utility power.
14 APS 1024 INT 1000W 2000W 89% 90A 47A 1.5A* 24 VDC 20-30 VDC 230 VAC ± 5% 50 Hz 15A Selectable: 28.8V/28.4V Wet/Gel 26.6V Wet/27.2V Gel 230V 4.3A Selectable: 144**, 163, 182, or 201VAC Selectable: 259** or 264 VAC 8.8A 45-55 Hz 4.3A 4-6 ms Specifications—Corded Models CORDED MODELS: APS 912 INT Weight: 11.
15 APS 2424 INT 2400W 4800W 89% 220A 112A 1.8A* 24 VDC 20-30 VDC 230 VAC ± 5% 50 Hz 30A Selectable: 28.8V/28.4V Wet/Gel 26.6V Wet/27.2V Gel 230V 8.5A Selectable: 144**, 163, 182, or 201VAC Selectable: 259** or 264 VAC 19.1A 45-55 Hz 10.4A 4-6 ms Specifications—Hardwired Models HARDWIRED MODELS: APS 2012 INT Weight: 17.
16 Copyright © 2000 Tripp Lite. Propiedad Literaria de Tripp Lite 2000. Reservados todos los derechos. 1111 W. 35th Street Chicago, IL 60609 USA Servicios a Clientes: (773) 869-1234 www.
17 Introducción ¡Felicitaciones! Usted ha adquirido el inversor / cargador de batería integrado más avanzado y con más características en el mercado.
18 Cargador A vanzado de 3 Etapas para Baterías Este sistema APS recargará sus baterías más rápido que otros cargadores convencionales debido a que su perfil de recarga de 3 etapas (Alimentación.
19 Seguridad Este manual contiene advertencias e instrucciones importantes que deben seguirse durante la instalaci ó n, operaci ó n y almacenaje de todos los Sistemas APS de Tripp Lite. Precauciones sobre la Ubicación del APS • Instale este sistema bajo techo, lejos de calor o humedad excesivos, polvo o luz solar directa.
20 Configuración Regulación de los Interruptores DIP de Configuración GR UPO A DE INTERR UPT ORES DIP (T odos los modelos) TIPO DE BA TER Í AS / PUNT OS DE VOL T AJE Usando una herramienta peque .
21 GR UPO B DE INTERR UPT ORES DIP (Modelos Selectos) COMP ARTICION DE CARGA / IGU ALAR CARGA DE BA TERIAS Usando una herramienta peque ñ a, ajuste los Interruptores DIP de Configuraci ó n “ Load Sharing ” (compartici ó n de carga) del Grupo B (ubicados en el panel frontal del sistema APS; vea el Diagrama 1, p á gina 33).
22 Selección de Baterías Seleccione el Tipo de Batería(s) Seleccione una bater í a o sistema de bater í as que suministre voltaje apropiado de CD y capacidad adecuada en amperios / hora al sistema APS. * Seleccione bater í as de ciclo profundo para obtener el m á ximo rendimiento de su sistema APS.
23 Conexión de Baterías (Estándar) 1 . Conecte la terminal positiva de CD del sistema APS directamente a un fusible UL recomienda que usted instale una caja de fusibles y un fusible aceptado por UL a una distancia no mayor de 18 pulgadas (46 cent í metros) de la bater í a.
24 Conexiones Eléctricas Directas al Circuito (T odos los modelos con toma directa al circuito – “ hardwire ” ) Refi é rase a los esquem á ticos el é ctricos, Diagrama 3, p á gina 33, para obtener informaci ó n sobre la conexi ó n el é ctrica apropiada de los modelos con toma directa al circuito (hardwire).
25 Regule el Interruptor “Operating Mode” (Modo de Operación) • Col ó quelo en la posici ó n “ AUTO/REMOTE ” (autom á tico / remoto) cuando usted desee utilizar los equipos conectados. VENTAJA: Suministra energ í a de respaldo durante ca í das de voltaje y apagones.
26 Interruptores, Luces Indicadoras y Otras Características (Vea el Diagrama 9 en la página 36 para localizar los siguientes interruptores, luces indicadoras y otras características.
27 8. “BATTERY HI/MED/LO” (Carga de Baterías Alta/Media/Baja - Todos los modelos) Estas tres luces se iluminar á n en combinaciones diferentes para indicar el nivel aproximado de carga y el volt.
28 Mantenimiento y Servicio Mantenimiento Este sistema APS no requiere mantenimiento alguno. No obstante, debe mantenerse seco en todo momento. Verifique peri ó dicamente todas las conexiones y cables en la unidad y sus bater í as. Apriete y limpie estas conexiones como sea necesario.
29 Garantía Limitada Tripp Lite garantiza que sus productos estar á n libres de defectos en materiales y mano de obra por un per í odo de un a ñ o (unidades utilizadas en EE.UU.) ó 120 d í as (unidades utilizadas fuera de EE.UU) a partir de la fecha inicial de compra.
30 Antes de llamar para pedir ayuda, pruebe estas soluciones para resolver algunos problemas comunes del APS. Antes de enviar el UPS al servicio de reparaci ó n, llame al departamento de Atenci ó n al Cliente de Tripp Lite, al tel é fono (773) 869-1234 en Estados Unidos o al (773) 869-1956 en el caso de nuestros clientes internacionales.
31 Especificaciones MODELOS CON CABLE: APS 912 INT APS 1024 INT Peso: 11.9 Kg 11.9 Kg INVERSOR Energ í a continua a 20 ° C: 900 Vatios 1000 Vatios Energ í a de sobretensiones transitorias (5 segund.
32 Especificaciones MODELOS CON TOMA DIRECTA AL CIRCUITO: APS2424 INT APS3636 VRI Peso: 18.5 Kg 25.6 Kg INVERSOR Energ í a continua a 20 ° C 2400 Vatios 3600 Vatios Energ í a de sobretensiones tran.
33 2 Diagrams/Esquemas 3 1 See "Configuration", pg. 5. 1.1 is DIP Switch Group A. 1.2 is DIP Switch Group B. Refiérase a la sección “Configuración”, página 20. 1.1 representa el Grupo A de Interruptores DIP. 1.2 representa el Grupo B de Interruptores DIP 1.
34 4 5 6 X/2 Volts X/2 Volts 6.1 X Volts X Volts X Volts X Volts 5.1 See Battery Connection, Pg.8. 4.1 is the fuse. X = Your APS's Inverter's Nominal Input Voltage. (See specs.) Refiérase a la sección “Conexión de Baterías”, página 23.
35 7 7.4 7.1 7.3 12V 8.6 8.1 8.3 8.4 12V 8.2 8.3 8.5 12V 8 7.2 Basic 12VDC Vehicular Battery Connection. See Pg.8. 7.1 is the alternator. 7.2 is the vehicle battery ground. 7.3 is the vehicle battery. 7.4 is the fuse. Conexión Básica de Baterías de 12V de CD en Vehículos.
36 9 3 15 61 13 5 4 14 8 2 12 9 11 13 15 1 6 5 4 14 8 2 10 9 7 1 . Operating Mode Switch (All models) 2 . DIP Switch Group A (All models) 3 . DIP Switch Group B (Select models only) 4 . “LINE” (All models) 5 . “INV” (Inverting—all models) 6 .
An important point after buying a device Tripp Lite APS1024INT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite APS1024INT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite APS1024INT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite APS1024INT you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite APS1024INT will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite APS1024INT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite APS1024INT.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite APS1024INT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite APS1024INT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
