Instruction/ maintenance manual of the product 93-2768 Tripp Lite
Go to page of 12
Owner’ s Man ual Quiet Mobile P o wer Congratulations! Y ou’ve purchased the most advanced, feature-rich Inverter/Charger designed for recreational vehicle applicatio ns.
Impor tant Safety Instructions SA VE THESE INSTR UCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all T ripp Lite Inverter/Chargers. Location W arnings • Although your Inverter/Charger is moisture resistant, it is NOT waterproof.
3 Feature Identification Identify the premium features on your specific model and quickly locate instructions on how to maximize their use. Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See Configuration section for setting instructions.
Operation Switch Modes After configuring, mounting and connecting your Inverter/Charger , you are able to operate it by switching between the following oper- ating modes as appropriate to your situation: AUTO/REMOTE: Switch to this mode when you need constant, uninterrupted AC power for connected appliances and equipment.
5 Configuration Set Configuration DIP Switches Using a small tool, set the Configuration DIP Switches (located on the front panel, see diagram) to optimize Inverter/Charger op eration depending on your application. Refer to the appropriate section to review the instructions for your specific model.
Select Battery Charger -Limiting Points “Most Limiting” (#B2 & #B1 Up): Charger -limiting takes effect the moment any 120V AC load is applied; char ger output falls gradually from full output at no 120V load passing through to no output at full load (factory setting).
Configuration (continued) 7 Battery Selection Select A uxiliar y Batter y T ype (if any) Select “Deep Cycle” batteries to receive optimum performance from your Inverter/Charger . Do not use ordinary car or starting ba tteries or batteries rated in Cold Cranking Amps (CCA).
8 Mounting W ARNING! Mount y our In ver ter/Charger BEFORE DC battery and A C power connection. Failure to f ollow these instructions ma y lead to personal injury and/or damage to the Inver ter/Char g er and connected systems.
9 • Connect DC W iring: Though your Inverter/Charger is a high-efficiency converter of electricity , its rated output capacity is limited by the length and gauge of the cabling running from the battery to the unit. Use the shortest length and largest diameter cabling (maximum 2/0 gauge) to fit your Inverter/Charger’ s DC Input terminals.
10 T o avoid overloading your Inverter/Charger , match the power requirements of the equipment you plan to run at any one time (add the ir total watts) with the output wattage capacity of your Inverter/Charger model (see Specifications). Do not confuse “continuous” wattag e with “peak” wattage ratings.
11 T roub leshooting SYMPT OM PROBLEMS CORRECTIONS No AC Output Unit is not properly connected to utility power Connect unit to utility power . (All Indicator Lights are OFF) Operating Mode Switch is set to “DC OFF” and A C input Set Operating Mode Switch to “A UTO/REMO TE” or “CHARGE ONL Y”.
12 200712159 93-2768 1111 W. 35th Street, Chicago, IL 60609 USA Customer Support / Support à la clientèle : (773) 869-1234 www .tripplite.com 200712159 93-2768 RV Series Inverter-Charger Owner’s Manual_Eng.
An important point after buying a device Tripp Lite 93-2768 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite 93-2768 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite 93-2768 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite 93-2768 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite 93-2768 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite 93-2768, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite 93-2768.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite 93-2768. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite 93-2768 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
