Instruction/ maintenance manual of the product 230/400 Tripp Lite
Go to page of 14
Owner’ s Man ual 1111 W. 35th Street • Chicago, IL 60609 USA (773) 869-1234 • www .tripplite.com Copyright ©2005 T ripp Lite. All rights reserved.
2 Impor tant Safety W arnings SA VE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all T ripp Lite SmartOnline 3-Phase 20kV A and 30kV A UPS Systems and their batteries.
1 2 3 4 13 12 7 10 11 9 8 5 6 3 Contr ol P anel There are two separate UPS system modules: a power module and a battery module. Familiarize yourself with the location and function of the features on each module before installing and operating your UPS system.
4 Rear P anels 1. Manual Bypass Switch: This dial is used in one step of putting the UPS in "BYP ASS” mode, which must be done before performing any maintenance on the UPS with the connected load supported. [See “Operation (Special Conditions)” for step-by-step instructions for going into “BYP ASS.
5 Rear P anels (continued) Refer to the Battery Module's Owner's Manual f or all safety warnings and connection instructions. 14. Fuse Holder (externally accessible): fuses protect against short circuit damage. If a heavy overload or short circuit is encountered, a fuse will blow .
6 Installation UPS LOCA TION Move your UPS over short distances using its wheels. Stabilize the UPS by releasing the stabilizers on each side of the unit.
7 Installation (continued) Operation (Normal Conditions) TURNING THE UPS ON • Make sure the UPS is properly installed (see Installation section) and the Manual Bypass Switch is set to NORMAL. • T urn the AC Input and Bypass AC Input Circuit Breakers ON.
8 Operation (Normal Conditions) (continued) SELF-TESTING When you turn the UPS ON, it will perform a brief self-test. See charts below for display sequences. Display sequence when AC input power is present: Display sequence when AC input power is absent: SELF TESTING .
9 INVERTER ON W ARNINGS When the inverter is ON, the LCD Display may show any one of the following warnings: Condition LCD Display Message UPS Output Overload OVERLOAD 1 10% UPS Charger Failure CHARGE.
10 Condition LCD Display Message Overload Shutdown ON BYP ASS OVERLOAD 150% SHUTDOWN... VERSION: XXXXXXX UPS Output Short Circuit ON BYP ASS SHOR T CIRCUIT! SHUTDOWN... VERSION: XXXXXXX Overtemperature ON BYP ASS HIGH TEMP! SHUTDOWN... VERSION: XXXXXXX DC BUS Overvoltage ON BYP ASS DC BUS O.
DR Y CONT ACT INTERF A CE This female DB9 contact-closure port allows your UPS to send contact-closure signals to indicate that it is in battery back-up mode and that its batteries are running low .
12 Comm unications (continued) REMO TE EMERGENCY PO WER OFF (EPO) This optional feature is only for those applications which require connection to a facility's Emergency Power Of f (EPO) circuit . When the power module is connected to this circuit, it enables emergency shutdown of the output.
Model: SU20K3/3X Includes: • Power Module • Battery Module Model: SU20K3/3INTPM Model: BP240V33 Input Input V oltage: 220/380, 230/400, 240/415V AC , 3ø , 4 wire (plus ground), wye Input F requen.
1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 2009XXXXX 93-2260_ES.
An important point after buying a device Tripp Lite 230/400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite 230/400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite 230/400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite 230/400 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite 230/400 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite 230/400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite 230/400.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite 230/400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite 230/400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
