Instruction/ maintenance manual of the product Ultrabass BVT4500H Behringer
Go to page of 12
Version 1.1 2007-07 ULTRABASS BVT4500H/5500H User manual.
2 ULTRABASS BVT4500H/5500H This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 ULTRABASS BVT4500H/5500H Foreword Dear customer, Welcome to the team of ULTRABASS users and thank you very much for expressing your confi- dence in BEHRINGER products by purchasing the BEHRINGER BVT4500H/ BVT5500H.
4 ULTRABASS BVT4500H/5500H 1. Introduction With the BVT4500H/5500H you have acquired a pro-level amplifier from our ULTRABASS series. This classic bass amp combines an uncompromising, “cutting-through” sound with a full range of sound-shaping features.
5 ULTRABASS BVT4500H/5500H This section describes how to use the front panel of the BVT4500H and the BVT5500H, illustrated on the previous page and above.
6 ULTRABASS BVT4500H/5500H (17) EFFECTS MIX control (BVT5500H only): If you created an effects loop, use this control to adjust the dry-wet mix. As you turn this control toward: V 0 (zero), you hear more of the dry signal (without effects). At zero, you hear only the dry signal.
7 ULTRABASS BVT4500H/5500H If you use a single speaker or a high-power speaker, connect this speaker to the Neutrik Speakon compatible jack. To prevent electrical shock and ensure the correct polarity, this jack locks an audio plug in place. Before you connect speakers to the BVT4500H/5500H, turn it off.
8 ULTRABASS BVT4500H/5500H 5. Setup example The following illustration provides an example of how to set up the BVT5500H. Bass Guitar Line level signal Line level signal High power amplified signal Fig.
9 ULTRABASS BVT4500H/5500H 6.4 EFFECTS LOOP The EFFECTS LOOP section can be used in three ways: 6.4.1 SEND and RETURN V PURPOSE: To create an effects loop, i.e., to apply external effects to the signal. V RESULTS: If you use the: V BVT4500H, only the audio signal that enters via the RETURN jack continues to follow the BVT4500H signal path.
10 ULTRABASS BVT4500H/5500H 8. System block diagram Fig. 8.1: BVT4500/5500H block diagram* * Rectangles represent control elements, ovals represent jacks.
11 ULTRABASS BVT4500H/5500H 9. Specifications BVT4500H BVT5500H Input ¼" mono jack, unbalanced (0 dB) 2 x ¼" mono jack, unbalanced (0 dB / -15 dB) Input impedance approx.
12 ULTRABASS BVT4500H/5500H 10. Warranty § 1 Other warranty rights and national law 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
An important point after buying a device Behringer Ultrabass BVT4500H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer Ultrabass BVT4500H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer Ultrabass BVT4500H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer Ultrabass BVT4500H you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer Ultrabass BVT4500H will certainly help you make a decision on the purchase.
If you already are a holder of Behringer Ultrabass BVT4500H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer Ultrabass BVT4500H.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer Ultrabass BVT4500H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer Ultrabass BVT4500H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
