Instruction/ maintenance manual of the product 500-19-54 Trilogy Touch Technology
Go to page of 19
500-19-54 700-19-54 DUAL CHANNEL DIGITAL TELEPHONE INTERFACE USER GUIDE ISSUE 1.2 TRILOGY COMMUNICATIONS LIMITED 26 Focus Way Walworth Estate And o ver Hampshire SP10 5NY England Telephone +44 (0) 1264 384000 Fax +44 (0) 1264 334806 Email 0H mail@trilogycomms.
The Copyright of the information and drawings in this document is the property of Trilogy Communications Limited of Andover, Hampshire and is neither to be reproduced in whole or in part, nor disclosed to a third party, without the prior written consent of Trilogy Communications Limited.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 3 of 19 ERRATA SHEET This sheet contains information regarding errors in this u ser guide.
500-19-54 Dual Cha nnel Telephone Interface Page 4 of 19 Issue 1.2 Trilogy Communications Limited CONTENTS 1. INTRODUCTION .................................................................................................. 5 1.1 S AFETY P RECAUTIONS .
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 5 of 19 1. INTRODUCTION 1.1 Safety Precautions This equipment has been designed and tested to the highe st safety standards. The following precautions should be covered to ensure safe operation of the apparatus.
500-19-54 Dual Cha nnel Telephone Interface Page 6 of 19 Issue 1.2 Trilogy Communications Limited.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 7 of 19 2. SYSTEM DESCRIPTION 2.1 Features The telephone unit is a 1U unit containing a power supply and three printed circuit cards; these provide one or two channels of telephone interface.
500-19-54 Dual Cha nnel Telephone Interface Page 8 of 19 Issue 1.2 Trilogy Communications Limited 2.2 General The unit contains one dual hybrid card 500-19-21 which can be used as either a means of co.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 9 of 19 Front Panel Controls (single channel) When in Auto mode, an incoming call will be answered with a blip of 2 tones being sent down the line.
500-19-54 Dual Cha nnel Telephone Interface Page 10 of 19 Issue 1.2 Trilogy Communications Limited 2.3 Dual Hybrid Frame – 500/700 -19-54 Card layout ( one or two TIC cards ) PSU LINE 1 INTERFACE Co.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 11 of 19 3. INSTALLATION 3.1 Dual Hybrid with TIC modules installed 3.2 Dual Hybrid without TIC modules installed 3.3 Specification Trilogy 500-19-5x Telephone Interface Frame Dimensions 485mm wide x 44.
500-19-54 Dual Cha nnel Telephone Interface Page 12 of 19 Issue 1.2 Trilogy Communications Limited.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 13 of 19 4. CONNECTORS Rear view 4.1 Mains connector - Power connection. IEC mains Pin Number Signal Direction From Unit L Live Input N Neutral Input E Earth Input 4.
500-19-54 Dual Cha nnel Telephone Interface Page 14 of 19 Issue 1.2 Trilogy Communications Limited 4.5 Phone connector. RJ11 connector. Pin Number Signal Direction From Unit 1.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 15 of 19 5. FRONT PANEL CONTROLS AND INDICATORS 5.1 I/F Power LED Indicates the TIC card is present and powered. 5.2 Hybrid Power LED Indicates the Hybrid card is present and powered.
500-19-54 Dual Cha nnel Telephone Interface Page 16 of 19 Issue 1.2 Trilogy Communications Limited.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 17 of 19 6. 500-19-21 DUAL HYBRID SET-UP 6.1 Introduction The 500-19-21 card carries two identical circuits and is controlled by the 700/500-19-00 interface cards and/or the front panel controls ( see the previous section for inform ation on the controls).
500-19-54 Dual Cha nnel Telephone Interface Page 18 of 19 Issue 1.2 Trilogy Communications Limited.
500-19-54 Dual Cha nnel Telephone Interface Issue 1.2 Trilogy Communications Limited Page 19 of 19 7. 500-19-00 TELEPHONE INTERFACE CARD SET-UP 7.1 Introduction The 700-19-00 interface card acts as a buffer between the hybrid that connects directly to the telephone line and the audio and data circuits of the Commander matrix.
An important point after buying a device Trilogy Touch Technology 500-19-54 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Trilogy Touch Technology 500-19-54 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Trilogy Touch Technology 500-19-54 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Trilogy Touch Technology 500-19-54 you will learn all the available features of the product, as well as information on its operation. The information that you get Trilogy Touch Technology 500-19-54 will certainly help you make a decision on the purchase.
If you already are a holder of Trilogy Touch Technology 500-19-54, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Trilogy Touch Technology 500-19-54.
However, one of the most important roles played by the user manual is to help in solving problems with Trilogy Touch Technology 500-19-54. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Trilogy Touch Technology 500-19-54 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
