Instruction/ maintenance manual of the product TRUTH B2092A Behringer
Go to page of 10
TRUTH B2092A Version 1.2 September 2006 Users manual.
2 TRUTH B2092A This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 TRUTH B2092A B2092A TRUTH High-Performance Active 360-Watt Studio Subwoofer for Mono, Stereo and Surround Applications s High-power 360-Watt amplifier delivers extreme dynamic range, with linear bas.
4 TRUTH B2092A 1. INTRODUCTION 1. INTRODUCTION Congratulations! By purchasing the TRUTH B2092A, you have obtained a powerful active subwoofer that effectively expands the transmission range of your stereo or surround system. You now own a tool that lets you reproduce the deepest bass frequencies with outstanding clarity.
5 TRUTH B2092A 2. CONTROL ELEMENTS AND CONNECTIONS 1.1 Before you get started 1.1.1 Shipment Your B2092A was carefully packed in the factory to guarantee safe transport. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred during transit.
6 TRUTH B2092A 3. APPLICATIONS.
7 TRUTH B2092A 3. APPLICATIONS Connect the mixing console outputs to the B2092A inputs marked LEFT and RIGHT . If you are using active monitors as main loudspeakers (e.g. B2030A or B2031A), connect the left loudspeaker to LEFT OUT, and connect the right loudspeaker to RIGHT OUT.
8 TRUTH B2092A making any changes, and then using the controls to finetune the settings, creating the best results possible. Therefore, first set the controls to the neutral position labeled TYPICAL, i.e. set PHASE to 0° and ROOM COMPENSATION to 0 dB.
9 TRUTH B2092A BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
10 TRUTH B2092A 6. WARRANTY 6. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
An important point after buying a device Behringer TRUTH B2092A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer TRUTH B2092A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer TRUTH B2092A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer TRUTH B2092A you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer TRUTH B2092A will certainly help you make a decision on the purchase.
If you already are a holder of Behringer TRUTH B2092A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer TRUTH B2092A.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer TRUTH B2092A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer TRUTH B2092A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
