Instruction/ maintenance manual of the product T1 Behringer
Go to page of 6
User Manual A50-28033-00001 TUBE CONDENSER MICROPHONE T‑1.
TUBE CONDENSER MICROPHONE T‑1 Safety precautions 2 At a glance 1. 1. Mount the microphone 2. Connect the microphone to the PSU-T 3. Connect the PSU-T to the mixer 4. Connect the mains cable 5. Switch on the PSU-T 6. Allow the tube to warm up 7. And you’re good to go! Safety precautions 2.
TUBE CONDENSER MICROPHONE T‑1 Control elements and connections 3 a bathtub, washing machine, swimming pool,etc.). When doing voice recordings, always use the enclosed windscreen to protect the capsule from moisture. PSU-T power supply: T o reduce the risk of electric shock, do not remove the top cover (or the rear section).
TUBE CONDENSER MICROPHONE T‑1 Set-up 4 The POWER switch on the unit's rear panel turns on the power supply . Here you also nd the following: a seven-pin XLR connector to connect to the T -1 .
TUBE CONDENSER MICROPHONE T‑1 Warranty 5 controls in the microphone channel should be set to mid-travel position to start with; low-cut lter and signal level attenuation should be switched off.
TUBE CONDENSER MICROPHONE T‑1 Specications 6 Specications 8. Transducer type condenser , 16 mm (0.63'') Polar pattern cardioid Preamplier vacuum tube (12AX7) Output (PSU-T) gold-p.
An important point after buying a device Behringer T1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer T1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer T1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer T1 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer T1 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer T1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer T1.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer T1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer T1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
