Instruction/ maintenance manual of the product SRC2496 Behringer
Go to page of 16
ENGLISH Version 1.1 May 2003 Users Manual ENGLISH ULTRAMATCH PRO SRC2496.
2 ULTRAMATCH PRO SRC2496 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 ULTRAMATCH PRO SRC2496 SRC2496 ULTRAMATCH PRO Ultra high-resolution 24-bit/96 kHz A/D-D/A, sample rate and format converter.
4 ULTRAMATCH PRO SRC2496 FOREWORD Dear Customer, welcome to the team of BEHRINGER users and thank you very much for expressing your confidence in us by purchasing the SRC2496.
5 ULTRAMATCH PRO SRC2496 1. INTRODUCTION 1. INTRODUCTION The BEHRINGER ULTRAMATCH PRO is a fully digital signal processor integrating 24-bit A/D and D/A converters. With its wide range of features, it provides a powerful state-of-the-art interface between the physical reality of music and its recording in the form of digital values.
6 ULTRAMATCH PRO SRC2496 2. CONTROL ELEMENTS Similarly to the input section, the display provides you with all the information on the output signal. 2.
7 ULTRAMATCH PRO SRC2496 2. CONTROL ELEMENTS The LEDs 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz read the sampling rate selected with the SAMPLE RATE switch.
8 ULTRAMATCH PRO SRC2496 3. APPLICATIONS Fig. 2.8: Wordclock connector The BNC connector WORDCLOCK is a high-impedance connector with no internal terminating impedance (75 ohms). Use it to connect devices for the external synchronization of your ULTRAMATCHPRO.
9 ULTRAMATCH PRO SRC2496 3. APPLICATIONS.
10 ULTRAMATCH PRO SRC2496 3. APPLICATIONS 3.2 Sample rate conversion No matter which type of digital audio signal you feed into the ULTRAMATCH PRO, it will convert it to a common standard format. Numerous conversion examples can be found in daily studio practice: s Conversion of 48 kHz DAT recordings to the CD standard of 44.
11 ULTRAMATCH PRO SRC2496 4. TECHNICAL BACKGROUND boost step involved prior to recording. This treble boost is undone during playback. A specific bit (emphasis bit) in the digital data stream contains the information whether or not t he signal has been processed with this technique.
12 ULTRAMATCH PRO SRC2496 There is no doubt that digital signal processing guarantees the lowest distortion and noise values. However, up until now signal conversion, specifically sampling rate conver.
13 ULTRAMATCH PRO SRC2496 Unlike digital connectors, analog connectors are not galvanically separated, but have a balanced design and are thus unproblematic in regard to ground loops.
14 ULTRAMATCH PRO SRC2496 The following figure illustrates how to correctly connect the optical input and output connections. Fig. 5.5: Connecting the UL TRAMA TCH PRO optically via T oslink + For many consumer devices the consumer format at the optical input is an absolute necessity, otherwise they do not accept the signal.
15 ULTRAMATCH PRO SRC2496 6. SPECIFICATIONS 6. SPECIFICATIONS Synchronization Internal sampling rates 32, 44.1, 48, 88.2, 96 kHz Synchronization via digital input and wordclock accepts all sampling ra.
16 ULTRAMATCH PRO SRC2496 The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or trans mitted in any form or by any means, electronic.
An important point after buying a device Behringer SRC2496 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer SRC2496 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer SRC2496 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer SRC2496 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer SRC2496 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer SRC2496, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer SRC2496.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer SRC2496. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer SRC2496 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
