Instruction/ maintenance manual of the product SL3242FX-PRO Behringer
Go to page of 17
Version 1.0 December 2003 Users Manual ENGLISH EURODESK SL3242FX - PRO /SL2442FX - PRO.
2 EURODESK SL3242FX - PRO /SL2442FX - PRO This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 EURODESK SL3242FX - PRO /SL2442FX - PRO FOREWORD Dear Customer, Welcome to the team of EURODESK users and thank you very much for expressing your confi- dence in BEHRINGER products by purchasing t his mixing console.
4 EURODESK SL3242FX - PRO /SL2442FX - PRO 1. INTRODUCTION Congratulations! With the EURODESK you have acquired a state-of-the-art mixing console that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a great variety of applications.
5 EURODESK SL3242FX - PRO /SL2442FX - PRO 2. CONTROL ELEMENTS 2. CONTROL ELEMENTS This chapter describes the various control elements of your mixing console. All controls and connections are explained in full detail. 2.1 Mono input channels 2.1.1 Microphone and line inputs Fig.
6 EURODESK SL3242FX - PRO /SL2442FX - PRO.
7 EURODESK SL3242FX - PRO /SL2442FX - PRO 2.2.2 Stereo channel equalizer Fig. 2.6: Stereo channel equalizer The stereo channels are equipped with a stereo equalizer. The filter types and cutoff frequencies for HIGH and LOW filters are the same as on the mono channels.
8 EURODESK SL3242FX - PRO /SL2442FX - PRO Use the routing switches for the subgroups to send the subgroup signal to the main mix. You can route it to the left stereo side ( =LEFT pressed), to the right stereo side ( =RIGHT pressed) or to both (=LEFT and RIGHT pressed).
9 EURODESK SL3242FX - PRO /SL2442FX - PRO Fig. 2.16: Level meter The red +48 V LED illuminates when phantom power is on. Phantom power is required for the operation of condenser microphones, and can be switched on with the corresponding switch on the rear of the console.
10 EURODESK SL3242FX - PRO /SL2442FX - PRO The CD/TAPE OUTPUT RCA connectors provide the stereo main mix signal to a tape deck or DAT recorder to record your mix. The signal is taken pre-fader, so that it will not be influenced by the fader positions.
11 EURODESK SL3242FX - PRO /SL2442FX - PRO.
12 EURODESK SL3242FX - PRO /SL2442FX - PRO 4. WIRING EXAMPLES Fig. 4.1: Wiring the console for studio operation 4.1 Studio set-up The following wiring example shows a studio set-up for 4-track-recording: the drums are mixed down to two subgroups and then routed via the subgroup outputs to two tracks of the multi-track recorder.
13 EURODESK SL3242FX - PRO /SL2442FX - PRO Fig. 4.2: Wiring the console for live operation 4.2 Live set-up This example shows a classic live set-up. As in the studio example, four drum microphones, bass, keyboard (stereo channel), guitar and two vocal microphones are connected.
14 EURODESK SL3242FX - PRO /SL2442FX - PRO 5. INSTALLATION 5. INSTALLATION Blown fuses must be replaced by fuses of the same type and rating. The mains connection is made using the enclosed power cord and a standard IEC receptacle. It meets all of the international safety certification requirements.
15 EURODESK SL3242FX - PRO /SL2442FX - PRO 6. SPECIFICATIONS 6. SPECIFICATIONS Mono inputs Microphone inputs (IMP Invisible Mic Preamp) T yp e XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 135.
16 EURODESK SL3242FX - PRO /SL2442FX - PRO 7. PRESETS 7. PRESETS Very dense and long rever beration of a large cathedral. Solo instrum ents / vocals in slow pieces. Simulates t he sound of early plate reverberators. A classic for drums (s nare) and vocals.
17 EURODESK SL3242FX - PRO /SL2442FX - PRO 8. WARRANTY 8. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3.
An important point after buying a device Behringer SL3242FX-PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer SL3242FX-PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer SL3242FX-PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer SL3242FX-PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer SL3242FX-PRO will certainly help you make a decision on the purchase.
If you already are a holder of Behringer SL3242FX-PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer SL3242FX-PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer SL3242FX-PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer SL3242FX-PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
