Instruction/ maintenance manual of the product TV-IP322P TRENDnet
Go to page of 134
.
- 1 - P R E FA C E Thank you for purchasing the TV -IP322P S ecurView™ Outd oor Po E Megapixel Day/Night I nternet Camera, a stan dalone syste m that ca n be connected directly to an Ethernet or Fast E thernet network.
- 2 - This Advanced Installat ion Guide provides you with th e instructions an d illustrations on how to u se your camera, which in cludes: Chapter 1 Intro duction to Your Came ra describes the f eatures of the camera. You will also kn ow the components and fu nctions of the camera.
- 3 - C o n t e n t s P R E F A C E C H A P T E R 1 I N T R O D U C T I O N T O Y O U R C A M E R A 1.1 C HECKING THE P ACKAGE C ON TENTS ............................................. 5 1.2 G ETTING TO K NOW THE C AMERA ...............................
- 4 - 4.8 E VENT C ONFIGURATION ........................................................... 58 4.9 T OOLS ................................................................................... 64 4.10 RS -4 85 ............................................
- 5 - C H A P T E R 1 I NTRODU CTION T O Y OUR C AMERA 1.1 Checking the Package Contents Unpack the package an d ch eck the items contained in the p ackage carefully.
- 6 - 1.2 Getting to Know the Camera The Camera an d the Shield * There are vario us positions of sc rew hole on the shield, allowing you to move the shield forward/bac kward accordi ng to your needs. For e xample, it wil l protect the camera lens well duri ng rainy day by a djusting the shiel d forward.
- 7 - The Connec tors The camera's connector s are collected in to a bundle of cable on the back panel of the camera, allo wing you t o connect the external d evices in a well-ordered way while you are installing the ca mera onto the wall (or ceiling).
- 8 - LAN: Plugs the pro vided Ethernet cable to con nect to your loca l area network (LAN). The LAN p ort of the camera supports t he NWay protocol so that the camera can detect th e network speed automatically.
- 9 - 1.3 Features and B enefits H.264/MPEG4/MJP EG Multi- codec Suppor ted The camera provides you with excellent imag es by the H.264/MPEG4/ M JPEG multi-c odec selectable technology , allowing you to ad just image size and q uality, and bit ra te according to the n etworking environment.
- 10 - Remote Con trol Supported By using a standard Web browser or the b undled SecurView™ Pro software application, t he administrator can easily chan ge the configuration of the cam era via Intran et or Internet. In addition, the camera can be upgraded remotely when a new firmware is available.
- 11 - automatically. This allows the camera to capture cl ear image whenever the environment light chan ged. PoE Supported PoE (Power over Ethernet) sta ndard enab les the camera to be powered by the Eth ernet, which simplifies your surv eillance system by eliminating the n eed of p ower outlet.
- 12 - 1.4 System Requireme nt Networking LAN 10 Base-T Eth ernet or 100Base -TX Fast Ethernet; Auto -MDIX. PoE IEEE 802.3af PoE Accessing the Camera u sing Web Br owser Platform M.
- 13 - C H A P T E R 2 H ARDW ARE I NST ALL A TION.
- 14 - 2.1 Assembling the Cam era Mounting B racket Assemble the sun vi sor and camera mountin g bracket to the camera by using the provided scre ws and washers, and then the came ra can b e mounted on the wall (or ceiling) se curely throu gh the three screw h oles on the base of the holder.
- 15 - junction poin ts of the connecto rs while you co nnect the cables or purchase a weatherproo f cable/power cord protector. 2. 3 Installing the Memor y Card The camera provid es a SD card slot th at allows you to install th e memory card (not includ ed in the package) to store files.
- 16 - 2. 4 Applications of the Camera The camera can be app lied in multiple application s, including: Monitor local and remote places and ob jects via Int ernet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with t he still images attached.
- 17 - C H A P T E R 3 A CCESSING T HE C AMERA 3.1 Using IP Setup The camera comes with a conveniently utility, IP Setup, which is in clud ed in the Installation CD-ROM, allowing y ou to search the cam era on yo ur network easily. 1. Insert the Installation CD - ROM into your computer’s CD -R OM drive to initiate the Auto -Run program.
- 18 - 2. Click the IP Setup from the Auto -Run menu screen. Th en IP Setup Wizard will appear. Click “ Next ” wh en the Welcome t o the IPSetup Setup Wizard ap pears. 3. Click “ Browse” to ch oose the desired de stination location. By default, the destination lo cation is C: Program FilesTRENDnet IPS etup.
- 19 - 4. Cli ck “ Next ” to confirm th e IPSetup soft ware to be installed to t he computer. 5. When the Installation C omplete window appears, click “ Finish ”.
- 20 - 6. After installing the IPSetup u tility, the app lication is automatically installed to your compu ter, and creates a folder in “ S tart ProgramTRENDnet IPSetup ”. 7. Click Start > Programs > TR ENDnet > IPSetup , an d then click IPSetup 8.
- 21 - - Camera Display Area: It shows the con nected camera( s) with in the same network. By d efault, the IP setting on the Camera is se t up DHCP. If you have DHCP server, the camera will automatic get th e IP address from DHCP se rver. If you do not have DHCP server on your network, it will show the d efault IP as 192.
- 22 - 3.2 Accessing to th e Camera By default, the IP setting on the camera is set to DH CP. It is recommend to use IPSetup to find t he camera’s IP addres s. Once you find the IP address of the camera, click Link to access the camera’s w eb page.
- 23 - The Main screen will appear as b elow: The Main screen of the W eb Configuration provides you with the useful information and fun ctions, including: Live View/Setup Switch: Click the button to configure th e camera. For details, see Chapter 4.
- 24 - Snapshot allows you to capture and save a still image. Browse allows you to assign the destination fold er to store the video clips and still imag es. Talk allows you to speak out throu gh the camera. Ple ase no te only one user is allowed to use this function a t a time.
- 25 - 3.3 Configuring the I P Address of the Computer If you are failed to acce ss to the camera, plea se check the I P address of your computer. When y ou connect th e camera to your computer d irectly to proceed with configuration of the camera, you n eed to set up t he IP addresses to be in the sa me segment for th e two devices to communicate.
- 26 - C H A P T E R 4 C ONFIGURING T HE C AMERA 4.1 Using the Web Co nfiguratio n You can access and man age the camera throu gh the Web browser an d the provided software app licatio n UltraView Pro . This chapter describes the Web Configuration, a nd guides you th rough the configurat ion of the camera by using the Web bro wser.
- 27 - 4.2 Using Smart Wi zard The camera’s Smart Wizard le ts you configure y our camera easily and quickly. The wizard will guide you through the necessary settin gs with detailed instructions on each step. To start the wizard, click Smart Wizard in the left m enu bar.
- 28 - Step 2. IP Settings Setup the IP setting, DHCP, St atic IP o r PPPoE. Step 3. Email Settings Enter the mail server informat ion. If you are using a free mails server, select the SSL and/or STARTTLS according to the mail server requirement.
- 29 - Step 4. Confirm Settings Click Apply to finish the s etting or click Prev to change the previou s setting or click Cancel to disregard a ll setting.
- 30 - 4.3 Basic Setup The Basic menu conta ins three sub -menus that p rovide the system settings for the camera, such as the Cam era Name, Location , Date & Time, and User manage ment.
- 31 - 4.3.1 Basic >> System Basic: This item allows you to assign the camera n ame and location. Camera Name : Enter a descriptive name for the camera , wh ich will help you to identify the camera when yo u have multiple cameras on your network.
- 32 - 4.3.2 Basic >> Date & Time Date and Time : Enter the correct d ate and time for the ca mera . TimeZone: Select the proper time zone fro m the pull -down menu. Synchronize with PC: Select this optio n and click Apply . The date & time settings of the ca mera will be synchron ized with the connected computer.
- 33 - 4.3.3 Basic >> User Administrator : To prevent unau thorized access to the cam era’s Web Configuration, y ou are strongly recommend t o change the default administrator pas sword. Type the ad ministrator password twice to set and con firm the p assword.
- 34 - Guest User Name: Enter the guest’s n ame you want to a dd to use the camera. Password: En ter the password for th e new guest. UserList: Display th e existing guests of the cam era. To delete a u ser, select the one you wan t to delete and click De lete .
- 35 - 4.4 Network Setting s The Network menu conta ins t wo sub- menus that provide th e network settings for the cam era, such as the IP Setting, DDNS Settin g, and IP Filter. 4.4.1 Network >> Network IP Setting : This item allo ws you to select the IP address mode an d set up the related configura tion.
- 36 - Static IP: Select this op tion to assign the IP ad dress for the camera directly. You can u se IPFinder to o btain the related setting values. IP Enter the IP address of the camera. The default setting is 192.168.10.30 . Subnet Mask Enter the Subnet Mask of the camera.
- 37 - device interoperability. In a ddition, it sup ports port au to mapping fu nction so th at you can access the camera if it is behind a n NAT router or firewall. Select the E nable option to enable this feature. Ports Numb er HTTP Port: The d efault HTTP p ort is 80 .
- 38 - Bonjour: The devices with Bonjou r will automatically broad cast their own services and listen for services being of fered for the u se of others. If your browser w ith Bonjour, y ou can find the camera on your loc al network without kn owing its IP address.
- 39 - 4.4.3 Network >> IP Filter The IP Filter setting allo ws the ad ministrator of the camera t o limit the users within a certain ran ge of IP add resses to access the camera.
- 40 - located within 192.168. 10 .50 ~ 192.168. 10 . 80 will not be allowed to access the cam era. IPv6: Enter the IP Address th at is allowed to access th e camera. Deny IP v4: Assign a ran ge of IP addresses that a re blocked to access the camera by entering the Start IP address and End IP address options.
- 41 - 4.5 Setting up Video & Audio The Video & Audio m enu contains four sub- menus that prov ide the video and audio settings for the camera.
- 42 - 4.5.1 Video & Audio >> Camera Image Setting Black Level: Adjust th e brightness l evel from 0 ~ 5. Brightness: Ad just the brightness le vel from 0 ~ 100. Saturation: Ad just the colors level fro m 0 ~ 100. Sharpness : Ad just the sharpnes s level from 0 ~ 100.
- 43 - 4.5.2 Video & Audio >> Video H.264 Video Resolution: Select the desired vid eo resolution fro m the four formats: SXG A , VGA , QVGA and QQVGA . The higher setting (VGA) obtains b etter video quality while it uses more resource within your n etwork.
- 44 - Frame Rate: Select Auto or a pro per setting depending on y our network status. MJPEG Video Resolution: Select the desired video re solution from th e four formats: SXG A , VGA , QVGA and QQVGA . The higher setting (VGA) obtains b etter video quality while it uses more resource within your n etwork.
- 45 - 4.5.3 Video & Audio >> Audio Camera Micro phone In : Select the Enable option t o enable the camera’s audio fun ction, so that y ou can receive the on -sit e sound and voice from the cam era.
- 46 - 4.5.4 Video & Audio >> Overlay / Mask This sub-menu is us ed to set the image o verlay and mask feature of the camera. Image Overlay: Thi s item allows you to set the image o verlay. In the Image File optio n, click Browse to select the image file from yo ur computer, and then click Upload .
- 47 - NOTE The width and height of the input overlay graphic should be multiple of 4 at a maximum size of 43690 pixels , and in JPG or BMP (24-bit RGB) format. Privacy Mask: This it em allows you to configure up t o two mask areas. Select the area 1 or 2 fro m the Windo w pull-down li st, and then click Enable .
- 48 - For example, when you select the Include Date & Time and Include Text options and click Apply , you c an see the related informatio n displayed on the live view image when y ou click the button .
- 49 - 4. 6 Event Server Con figuration The Event Server menu con tains four sub-menus that allow you to upload images to F TP, send emails that include stil l images, and store the images to a NAS system.
- 50 - 4.6.1 Event Server Setting >> HTTP HTTP Notify For Motion Trigger Send the query par ameter via an H TTP notification when an event is triggered.
- 51 - Example: Host: 192.168.10.1 Port: 80 Query: xxx.cgi?name1= value1&name2=value2 Ex: cgi/event.cgi?status= #s&time=#t&mod el=modelnam e Result: http://192.
- 52 - FTP Upload with: S elect upload to FTP with one snapshot image or a series image in pre -event/p ost-event time when e vent triggered. NOTE Due to the network environment, the camera may not upload number of images that you set. 4.6.3 Event Server Setting >> Email Email SMTP Server Address: Enter th e mail server address.
- 53 - SMTP Port: As sign the SMTP p ort in the text b ox. Th e default SMTP port is 25 . If the mail server requ ires an encrypted connection, you should check the SSL o ption. SSL / STARTTLS: Most free email services r equire an encrypted connection.
- 54 - 4.6.4 Event Server Setting >> Network Storage Network Stor age Samba Server Addr ess: E nter the IP address of the Network Storage server. Share: Assign the folder on the Network Storag e server to sh are the files to users. Path: Assign the pat h for uploadin g the files on the Networ k Storage server.
- 55 - Encode Format: Se lect MPEG4 o r H.264 as the encode format while recording. File Format : Select M P4 or AVI as th e file format while recording.
- 56 - Instant Message Jabber ID: En ter your user ID to login into the Jabber IM service. Jabber Password: Enter th e password to login into th e Jabber IM service. Manually Specify Server Host /Port: Select the Enab le option to manually configure the Jabb er server settings.
- 57 - 4. 7 Motion Detec t The Motion Detect menu contains the com mand and option that allow you to enab le and set up the motion detection f eature of th e camera. The camera provides t hree de tecting areas. To enable the detecting a rea, select Window 1 / 2 /3 from the pull -down list, and then select Enable .
- 58 - 4. 8 Event Configura tion The Event Config menu co ntains five sub -menu s that provide the commands to conf igure event pro files..
- 59 - 4.8.1 Event Configuration >> General Setting General Snapshot/Reco rding Subfolder : You can assign a descriptive name for the subfold er to save the cap tured image/video fil es . Otherwise, leave this optio n blank to use the default set ting.
- 60 - Profiles list. To delete the p rofile, select the profil e in the list and click Delete . Profile Name: Display t he profile nam e that you select in the Schedule Profiles list. Weekdays: Select the weekday(s) that y ou want to separat ely assign in the schedule profil e.
- 61 - 4.8.3 Event Configuration >> M otion Detect Trigger Motion Detect Trigger: Select the Enable op tion to enable th e trigger function of the ca mera, so that y ou can send captured images within the det ecting area to th e FTP server, email receiv er, or the Network Storage server.
- 62 - 4.8.4 Event Configuration >> Schedule Trigge r You can separately configu re the schedule for trigger functio n of the camera by Email , FTP , or Netwo rk Storage . Select the Enable o ption on each item, and th en select a Schedule Profile from the pull -down list and set the Inter val time.
- 63 - 4.8.5 Event Configuration >> GPIO Tr igger GPIO Trigger: Se lect the Enable Tr igger In 1/2 option to enable the GPIO trigger function o f the camera, so that you ca n set Trigger Out.
- 64 - 4. 9 Tools The Tools menu pro vides the commands that allow y ou to restart or reset the camera. You can a lso backup and restore your configuration , and upgrad e the firmware for the camera.
- 65 - Factory Reset : Click Reset to restore all factory default setti ngs for the camera. You can also do the ph ysical reset by press the reset button on the camera. Remo ve the front co ver of the cam era and press the reset butt on as indicates below.
- 66 - 4.1 0 RS - 485 The RS-485 menu pro vides th e control settings for ext ernal device through the I/O p ort..
- 67 - 4.10.1 RS -485 >> RS-485 Setting Select the Enable optio n and complet e the required config uration to u se the RS-485 function o f the device. Popular Protoc ol Setting: Select a Protoco l (Pel co -D or Pelco -P) and then select a Camera ID .
- 68 - 4.10.2 RS -485 >> Patrol The Patrol function pro vides the pat rol con trol settings for the connected camera. Preset Position To set the preset position for the conn ected camera: 1. Use the Navigation b uttons to move the camera lens to the desired position.
- 69 - Zoom Speed : Adjust the speed (1 ~ 10) while zooming the lens. Focus Speed: Adjust the speed (1 ~ 10) while focusing th e lens. Zoom In/Zoom Ou t: Click to zoom in/out the live view image. Focus Far/Focu s Near: Click to adjust the focus by far/near.
- 70 - 4.11 Setting up the SD Ca rd The SD Card menu allows you to set the SD card function ins talled in the camera..
- 71 - 4.11.1 SD Card >> SD Card Setting SD Card Dismount: Click Dismo unt to safely remove the SD card that is installed in the cam era. Note: You must di sable the event trigger in ord er to dismount the SD Card. SD Card Informa t io n : Displays the information of th e installed SD card, including t he Total space and Fr ee space .
- 72 - 4.1 2 Information The Information menu d isplays the current configuration and events log of the camera..
- 73 - 4.12.1 System Information >> Device Information Display the Basic, Video & Audio, and N etwork settings of the camera. 4.12.2 System Information >> Logs The Logs table displays the e vents log record ed by the system.
- 74 - C H A P T E R 5 S E C U R V I E W ™ P R O S O F T W A R E This chapter describes detail ed instru ctions on using SecurView™ Pro, a customized software app lication with a user-friend ly interface that allows you to access your cameras. The Soft ware can monitor an d record up to 36 cameras.
- 75 - 5.1 Installation 1. Insert the Installation CD - ROM into your computer’s CD -R OM drive to initiate the Auto -Run p rogram. 2. Click the Secur View™ Pro from th e Auto-Run m enu screen. NOTE: To use SecurVi ew™ Pro, you mu st have Microsoft .
- 76 - 3. Then SecurView™ Pro Setup Wizard will appear. Click “ Insta ll ”. 4. Wait until the pro gram finish the installation . By default, the destination location is C: Prog ram FilesTRENDnet SecurVie w Pro.
- 77 - 5. Click “ Finish ” to fin ish the installation . 6. Af ter installing the SecurView™ Pro, the ap plication is automatically installed to y our computer, an d creates a folder in “ Start ProgramTRE NDnetSecurView P ro ”.
- 78 - 5.2 Using SecurView™ Pr o 5.2.1 Launch the Program To start SecurView™ Pro, click Start > All Program s > TRENDne t > SecurView™ Pro > SecurView™ Pro . You can also start the pro gram by double-click the S ecurView™ Pro icon on y our desktop.
- 79 - 5.2.2 Main Window and Features When you start an d login to SecurView™ Pro, th e Main windo w will display as below: The Main window pro vides you with th e information on operating t he system, as well as the con trol panel such as th e Quick Launch b uttons, and so on.
- 80 - Quic k Laun ch But tons a re locat ed be low t he Live Vi ew Win dow , pro vi ding y ou w it h t he fol low ing qui ck- la unc h fu ncti on s: Button Function Logout : To l og out the Secur.
- 81 - Camera View Mod e bu ttons in this area allow you to switc h the camera view mode. Buttons Functions Display the connected camera(s) in a single camera view mode. Display the connected camera(s) in a quad view mode. Display the connected camera(s) in a 3 x 3 grid view mode.
- 82 - Camera List display s the status of the con nected cameras. If multiple cameras are conn ected, you ca n switch to the live view of each camera by simply selectin g the camera from the list. eMap allows you to select the desired camera to t he view from the map easily.
- 83 - 5.2.3 Manage the Cameras Before adding th e cameras, please setup the recording setting first. Configure Recording Settings 1. Click the bu tton and then select Record Sett ing . 2. Default path is C: , c lick B rowse an d select the desire directory then click Save to complete the con figuration.
- 84 - Add a Camera 1. Click the bu tton and select Device Set ting to display t he Device Setting window. 2. Click New ..
- 85 - 3. Click on Search , all cameras that’s conn ected to your ne twork would appear. 4. Select the camera you would like to a dd and then click Add .
- 86 - 5. The information of the cam era will display on the screen. It will auto detect the IP ad dress/port nu mber and display the stream type of the camera. P lease type in th e correct user name and pas sword, then select Preview to view live image.
- 87 - Records stream vid eo by schedule. You can setup the schedule by click Add Sch edule here. Click on New to create a n ew schedule and select th e time to record. Click on Save when finish. Motion: Record video by Mo tion Detection. Mo tion detection recording required to setu p a motion d etection area.
- 88 - Click on Motion detection area to setup Enable motion detectio n windows, s et up the senstivity and click on Save ..
- 89 - Motion by Sched ule: same requirement as Motion & Schedule recordin g. Digital Input: Recording triggered wh en there I/O port is triggered.
- 90 - 7. Camera list will app ear with recording ty pe notification. 8. Once you ad ded all the camer as, click the close butt on “x” on the Device Setting windows to r eturn to the main windows.
- 91 - NOTE Divx/Xvid codec is required for viewing the imag e of camera. If the image cannot be displayed in the Live View/Preview window normally, click the following path to download and install the required component: http://download.divx.com/divx/DivXInstaller.
- 92 - 2. To delete a camera: select the desired o ne and then click Remove . Click Yes to confirm. View Camera Image Since you have added ca mera(s) to the system, t he image of the selected camera(s) will be d isplayed on t he Live View Window automatically.
- 93 - The Information icon ( ) on the top-right corn er of the window provides you with the options to co nnect/disconnect the camera, select a camera t o be displayed in the window, capture a still image of th e camera live video, or switch to eMap mode.
- 94 - Playback the Recorded Files 1. Click the bu tton to display the Playb ack window. 2. On the Playback w indow, select th e camera and setup the begin/end date and begin/end t ime, then click Search . The search result will be displayed in the Reco rd File list .
- 95 - 3. To playback the video clip, se lect the desired fil e and click Play . 5.2.4 eMap Setup & Camera Status Manage eMap Click the bu tton and select View Setting to manage eMap. eMap refers to the g eography an d device scope in the SecurView™ Pro, which visually p resents the devices in your security system.
- 96 - To add an eM ap 1. On the View Setting window, click New . 2. Enter an eMap name..
- 97 - 3. Clic k Browse to select a Picture File fr o m your compu ter. Picture will display in the Preview window. 4. Click Save and click OK to apply th e settings.
- 98 - 5. Click Camera Location to assign t he camera location. 6. The following screen appears ..
- 99 - 7. Select the camera from th e list an d then click the po sition on th e map. The camera icon will be display ed on map. 8. Click Save when co mplete.
- 100 - To modify/remove an eMap 1. To edit the eM ap: In the eMap L ist, select the map name from eMap list, and click Mo dify . 2. The map’s information wi ll display o n the preview windows. After changes the setting infor mation, click Save to sav e the settin g.
- 101 - 3. To delete the e Map: In the eMap List, select the desired o ne and click Remove . The s elected map will be re moved from t he list..
- 102 - View eMap a. Click the bu tton and select eMap View . b. Select the map from the eMa p Name list..
- 103 - Camera Status Click the camera icon , the camera Live Monitor window will di splay live image on that ca mera. 5.2.5 System Info Account Click the System button an d select Account to ch ange the administrator password of th e system.
- 104 - Enter the Cur rent password , and then enter the new pass word twice (in the Type n ew passwo rd and Retype password boxes). Then click Save . Version Cl ick the System button a nd select Version to vi ew the current firmware version o f th e system.
- 105 - System Setting Click the System button an d select System Setting . Auto Scan period can b e set from 30 seconds to 1 00 seconds. 5.2.6 Event Settings Set ting up Event Server Click the bu tton and select Ev ent Server to configure the SMTP settings for email n otification u se.
- 106 - Select the Enable SMTP option and configure th e following information correctly to start the email featu re. SMTP Server Addr ess: Enter th e mail server address. For example, mymail.com o r smtp.gmail.com or smtp.live.com Sender Email Address: Enter th e email address of the u ser who will send the email.
- 107 - Port Numb er: Enter the port number u sed for the email server. SSL: If the mail server req uires an en crypted connection, you should ch eck the SSL o ption. For example, g mail users , please select this option. When completed, click Save an d then select OK .
- 108 - Sending Notification to the Use r Click the bu tton and select Ad dress Book to assign the user to the Address Book of the ca mera. The user will r eceive a real - time notification from the sy stem while trigg ering out. 1. On the Address Book window, click New .
- 109 - be displayed, where you can chan ge the user’s information and then click Save when com pleted. 5. To delete the u ser: In th e Address Book List, select the desired user and click Remove .
- 1 10 - 2. Do one of the follow ing: SMTP: Select this option and enter the Sub ject and Message, the system will s end an email message to the selected user(s) in the Ad dress Book List. Play Sound: Select this option select a sound file from the computer, so that t he system wil l alarm by the sound while triggering out.
- 111 - C H A P T E R 6 How to access the ca mera behind a Router You can either setup t he Dynamic DNS connection via came ra itself or your home router. An account from any of the l isted DDNS pro viders is required prior to th is operation. Configure DDNS on your C amera 1.
- 1 12 - 3. In the Port Number section, assign an HTTP port of the cam era. The default HTTP Port on the camera is 80. The example shows above is using port n umber 9000. 4. Open another web bro wser and go to your Router’s Web Configuration page. (In t he e x ample, TRENDnet’s TEW -651B R Wireless N router is us ed) 5.
- 1 13 - Private Port: The HT TP port that y ou assign on you r Camera. Public Port: The po rt used on remote side to a ccess to your Camera. LAN Server: The local IP address of y our Camera. Then click Add to a dd the application. * Please refer to your rou ter’s user’s manual for detail Virtual Server setting.
- 1 14 - 6. Open another web bro wser and en ter your DDNS domain and camera’s port nu mber. http://yourDomain Name:PortNumber 7. Camera’s login page w ill appear. Configure DDNS on your r outer 1. Go to Camera’s D DNS Ports Nu mber section, assign a HTTP port for your camera an d click Apply .
- 1 15 - 3. Find the Dy n amic DNS con figuration section. 4. Enable DDNS, fill out the following information and then cli ck Apply ..
- 1 16 - 5. Go to Virtual Server* section and create a new entry . Enable : Click Enable Name : Enter th e application name (eg. Ca mera Nam e) Protocol : Select T CP Private Port: The HT TP port that y ou assign on you r Camera. Public Port: The po rt used on remote side to a ccess to your Camera.
- 1 17 - A p p e n d i x A.1 Specification Image Sensor Sensor 1 /3” 2-megapixel colo r CMOS Sensor Resolution 1 600 x 12 00 Min. Illumination 0 Lux System Hardware Processor ARM9 base RAM 64MB SDRAM ROM 8MB NOR Flash Power DC12V / AC24V Lens Assembly Lens Type Board lens Lens Specification F1.
- 1 18 - Audio Input 3.5mm external microph one inpu t jack Output 3.5mm speaker ou tput jack (Mon o) Format PCM/AMR (AMR is for 3 GPP only ) User Interface LAN RJ -45 port SD Card Slot Yes I/O Connecto rs GPIO : 2-in/1 -out connectors ; RS -485; A C24V Communication LAN 10/100Mbps Fast Ethernet, a uto -sensed, Auto- MDIX PoE IEEE802.
- 1 19 - A.2 G PIO Terminal App lication Typically used in association with programm ing script s for developing applications for motion d etection, event triggering, alarm notification via e-mail, and a variety o f external contro l functions.
- 120 - A.3 B andwidth Refe rence Guide H.264 Resolution Frame rate (fps) Bit rate (Kbit/s) Lowest Low Normal High Highe st QQVGA 30 128 128 128 128 128 QVGA 30 128 128 256 512 1024 VGA 30 128 128 512.
- 121 - A. 4 G lossary of Term s NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III , IV , or V unshielded twisted-pair media. 100BASE- TX The two-pair twisted-media implementation of 100BASE-T is called 100BASE-TX.
- 122 - Communication Communication has four components: sender, re ceiver, message, and medium. In networks, device s and application tasks and processes communicate messages to each other over media. They represent the send er and receivers. The data they send is the message.
- 123 - distributed company and operates the company’s missi on - critical applications. Ethernet The most popular LAN communication technology. There are a variety of types of Ethernet, including 10Mbps (traditional Ethernet), 100Mbps (Fast Ethernet), and 1,000Mbps (Gigabit Ethernet).
- 124 - is easier for humans to read hexadecimal nu mbers than binary numbers. I Intranet This is a private network, inside an organization or company that uses the same software you will find on the public Internet. The only difference is that an Intranet is used for internal usage only.
- 125 - J JAVA Java is a programming language that is specially des igned for writing programs that can be safely downloaded to your computer through the Internet without the fear of viruses.
- 126 - network are: LAN – (local area network): Computers are in close distance to one another. They are usually in the same office space, room, or building. WAN – (wide area network): The computers are in different geographic locations and are connected by telephone lines or radio waves.
- 127 - Protocols that dictate the format of data for transferors the medium include token-passing and Carrier Sense Multiple Access with Collision Detection (CSMA/CD), imp lemented a s token-ring, ARCNET, FDDI, or Ethernet.
- 128 - Workstations, single-attach stations, dual-attach stations, and concentrators are FDDI stations. Subnet mask In TCP/IP, the bits used to create the subnet are called the subnet mask.
- 129 - WEP WEP is widely used as the basic security protocol in Wi-Fi networks, which secures data transmissions using 64-bit or 128 -bit encryption. Windows Windows is a graphical user interface for workstations that use DOS. WPA WPA (Wi-Fi Protected Access) is used to improve the security of Wi-Fi networks, replacing the current WEP standard.
- 130 - Limited Warranty TRENDnet warrants its pro ducts against defect s in material an d workmanship, under n ormal use and ser vice, for the follow ing lengths of time from the date of pu rchase. TV - IP 322P – 3 Years Li mited Wa rranty AC/DC Power Adapter, Cooling Fan, an d Power Supply carry 1 year warranty.
- 131 - Return Material Authoriza tion (RMA) number will be issued. An RMA number is required in o rder to initiate warranty service support for all TRENDnet products.
- 132 - OTHER FINANCIAL LO SS ARISIN G OUT OF OR IN CONNE CTION WITH THE SALE, INSTALLATION, MAINTEN ANCE, USE, PERFORMANCE , FAILURE, OR INTERRUPTION OF THE POS SIBILIT Y OF SUCH DAMAGES, A ND LIMITS I TS LIABILITY TO REPAIR, RE PLACEMEN T, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNE T’S OPTION.
- 133 -.
An important point after buying a device TRENDnet TV-IP322P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TV-IP322P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TV-IP322P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TV-IP322P you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TV-IP322P will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TV-IP322P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TV-IP322P.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TV-IP322P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TV-IP322P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
