Instruction/ maintenance manual of the product PMP3000 Behringer
Go to page of 17
Version 1.0 November 2006 User Manual EUROPOWER PMP 1000/P M P3000/P M P 5000.
2 EUROPOWER PMP1000/PMP3000/PMP5000 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 EUROPOWER PMP1000/PMP3000/PMP5000 FOREWORD Dear Customer, Welcome to the team of EUROPOWER users and thank you very much for expressing your confi- dence in BEHRINGER products by purchasing t h is power mixer.
4 EUROPOWER PMP1000/PMP3000/PMP5000 1 INTRODUCTION Congratulations! With the PMP1000/PMP3000/PMP5000 you have acquired a state-of-the-art power mixer that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a wide variety of applications.
5 EUROPOWER PMP1000/PMP3000/PMP5000 2 CONTROL ELEMENTS 2 CONTROL ELEMENTS A detailed description of all functions of your power mixer can be found in the following chapters. Please also refer to the enclosed sheet with the numbered illustrations to get a good overview of the control layout.
6 EUROPOWER PMP1000/PMP3000/PMP5000 2 CONTROL ELEMENTS PMP 1000: Channels 13/14 and 15/16 are routed to the main mix without additional tone or volume adjustment. For example, using the channels 13/14 and 15/16 you can connect a submixer and utilize the PMP1000’s power amplifier.
7 EUROPOWER PMP1000/PMP3000/PMP5000 2 CONTROL ELEMENTS 2.3 Effects section List of all multi-effects processor presets. The LED level meter on the effects module should always show a sufficiently high level. Make sure that the Clip LED illuminates with signal peaks only.
8 EUROPOWER PMP1000/PMP3000/PMP5000 3 DIGITAL EFFECTS PROCESSOR 2.4.1 Connectors Use the CD/TAPE INPUT jacks (RCA) to connect an external stereo signal, such as a CD player, tape deck or other line-level sources. The VOICE CANCELLER filters vocal-specific frequencies from the CD/TAPE INPUT signal.
9 EUROPOWER PMP1000/PMP3000/PMP5000 4 INSTALLATION 4 INSTALLATION 4.1 Mains connection The mains connection is made using the enclosed power cord and a standard IEC receptacle. It meets all of the international safety certification requirements. Blown fuses must be replaced by fuses of the same type and rating.
10 EUROPOWER PMP1000/PMP3000/PMP5000 Fig. 4.7: Speakon ® pin assignment 4 INSTALLATION 4.3 Loudspeaker connections Your power mixer is equipped with high-quality loudspeaker connectors (compatible to Neutrik ® Speakon ® ), which ensure safe and trouble-free operation.
11 EUROPOWER PMP1000/PMP3000/PMP5000 5 WIRING EXAMPLES 5 WIRING EXAMPLES Fig. 5.1: Stereo operation For stereo operation the POWER AMP switch must be set to its upper position (MAIN or MAIN L/MAIN R). Outputs A and B provide the stereo main signal for passive speakers.
12 EUROPOWER PMP1000/PMP3000/PMP5000 Fig. 5.3: Dual mono operation For a dual mono operation, the AMP MODE switch must be set to its center position (MON1/MONO for PMP3000/PMP5000 or MON for PMP1000)! The two loudspeaker outputs provide the main and the monitor signals, separately from each another.
13 EUROPOWER PMP1000/PMP3000/PMP5000 5 WIRING EXAMPLES Fig. 5.5: Expanded set-up This application is an expanded set-up based on the standard set-up as shown in fig. 5.4, and provides additional connection options. Again, this is just an example, which can be expanded in various ways.
14 EUROPOWER PMP1000/PMP3000/PMP5000 6 SPECIFICATIONS 6 SPECIFICATIONS PM P100 0 PMP 3000 P MP 5000 MI CROPHO NE I NPUTS Type Mic E. I. N. (20 H z - 20 kHz) @ 0 Ω sou rce re sistance @ 50 Ω sou rce r esista nce @ 150 Ω sou rce resi stan ce Gain Max.
15 EUROPOWER PMP1000/PMP3000/PMP5000 BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
16 EUROPOWER PMP1000/PMP3000/PMP5000 7 WARRANTY T echnical specifications and appearance subject to change without notice. The information contained herein is correct at the ti me of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners.
17 EUROPOWER PMP1000/PMP3000/PMP5000 FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Responsible party name: BEHRINGER USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
An important point after buying a device Behringer PMP3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer PMP3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer PMP3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer PMP3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer PMP3000 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer PMP3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer PMP3000.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer PMP3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer PMP3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
