Instruction/ maintenance manual of the product TEW-509UB TRENDnet
Go to page of 26
1.
2 Federal Communication Commission Interfe rence S t atement This equipment has been tested and found to comply with the limit s for a Class B digital de vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a r esidential installation.
3 Table of Contents Federal Communic at ions Commis sion (FC C) Interference stateme nt 2 C E M a r k W a r n i n g 2 C h a p t e r 1 – W i r e l e s s L A N N e t w o r k i n g Transmission Rate 4 .
4 Chapter 1- Wireless LAN Networking This section provides background information on wireless LAN networking technology . T HE INFORMA TION IN T HIS SEC TI ON I S FOR Y OUR REF ER ENC E. C HANGING NETWORK SETTI NG S AND P AR TICULA RL Y SECURITY SETTTINGS SHOULD ONL Y BE DONE B Y AN AUTHORIZED ADMINISTRA TOR.
5 When a numb er of wireless stations are conne cted using a single acce ss point, you have a Bas ic Service Set (BSS)..
6 In the ESS diagram below , communication is done through the access point s, which relay data p ackets to other wireless stations or devices connected to the wired network. Wireless stations can then acc ess resources, such as a printer , on the wired network.
7 W IRELESS LAN S ECURITY Because wireless networks are not as secure as wired netw orks, it is vital that security set ti ngs are clearly understood and appli ed. The list below shows the possible wir eless securi t y levels on your adapter starting with the most secure.
8 Chapter 2 - Getting Started This cha pter int roduces the Adapter and prepares you to use the Wi reless Utility . 2.1 About Your 802.11a/b /g Wireless USB2.0 Adapter with HotSpot Detector The Adapter is an 802.11a, 802.11b, and 80 2.11g compliant wireless LAN adapter.
9 2.4 Wireless Uti lity & Adapter Hardware Installation NOTE: Please do not connect the USB adapter unless in structed to do so Follow the instruction s below to install the USB Adapter and Utility. STEP 1 Insert the Driver and Utility CD into CD d rive STEP 2 Autorun window appears automatically , c l ick on Inst all Utility bu tton to start .
10 STEP 5 In the destination Folder screen you are asked to confirm the Destination Folder for the application softw are. Click Next to continue. STEP 6 The wizard is ready to begin installatio n.
11 STEP 7 Click Fini sh to complete the client utility installation . STEP 8 At this moment plea se insert your USB Adapter to your Laptop, Choose Inst all the sof tw are automatically and click Next . STEP 9 Click Fi nish to comp lete the installation .
12 2.6 Using the Utility to Configure Your Network The following are exp lanations on how to config ure an d use the Utility program. After completing the installation procedure, a new icon will automatically appear in the lower right task bar.
13 2.6.1 Link Information Click the Link Infor m ati on tab to see general information about the program and its op erations. The Link Information tab does not require any configuration. The following table describes the items found on the Link Infor mation screen.
14 2.6. 2 Si te Surv ey Click the Site Survey tab to se e available infra structure and ad hoc netwo rks. On this screen, click Refresh to refresh the list at any time. Connecting to a diff erent n etwork Hold your mouse pointer over the network icon, and click the right mou se button to select the network.
15 2.6. 3 Pr o fi l e T o add a new configuration pro file, click Add on the Profile tab. T o modify a configuration profile, select the configuration from the Pro file list and click the Edit bu tton.
16 Scan Available Networks Click the Browse button on the Profile Settings scree n to scan for availab le inf r astructure and ad hoc networks. On this list , click Refresh to refresh the list at any time . To configure a profile for Ad-Hoc or Infrastructure mode, select the Network Type field on the Profile Settings.
17 WP A/WP A2 Enables the use of Wi-Fi Pro tected Access (WP A). Choosing WPA/WPA2 opens the WPA/WPA2 Sec urity Settings screen. Th e option s include: TLS (T ransport Layer Security) is a Point-to-Point Protocol (PPP) extensi on supportin g addition al authenti cation meth ods within PPP .
18 Advanced Settings After Security Settings finished, the Advanced Settings screen will be shown as following. The following table describes the items found on the Advanced Settings screen . Power Sav e Mode Shows the power save mode. Power ma nagement is disabled in ad hoc m od e.
19 Aft er adv an ce s ett ings ar e fini shed , the f ollowi ng sc reen s howe d as below. You can activate the profile now or later..
20 Chapter 3 – HotSpot This section explains the ha rdware section of the TEW-509UB. 3.1 Charging the TEW -509UB The TEW -509UB is powered by a rechargeable battery . The battery must be charged before first use as follows. CAUTION Most notebook computer USB connectors are horizontal.
21 3.3 LCD Display The illustration below show s the icons in the LCD. A ll the icons will not necessarily appear together as shown here. Fully charged and Re charging icon s w o uld appea r during charging p ro c e ss only . 3.4 Finding a HotSpot Refer to the following to find a ho t spot.
22 Chapter 4 – Maintenance This chapter describes how to un install or upgrade the Wireless Utility. 4.1 Uninst all the Driver Follow the steps be low to remove (or uninstall) the USB Adapter driver from your computer . Step 1. To remove the driver from the OS , go to Start -> Cont r ol Panel Step 2.
23 Glossary For unfamiliar terms used below , loo k for entries elsewhere in the glossary . AD -HO C (IBSS) Ad-hoc mode does not require an AP or a wired network. A network that transmits wireless from computer to computer without the use of a base st ation (access point).
24 RO A M I N G In an infrastructure network, wireless st ations are able to switch from one BSS to another as they move between the coverage areas. During this period, the wireless stations maintain uninterrupted connecti on to the network. This i s roaming.
25 Limited W arranty TRENDware warrants its pr oducts against defects in material and workmanship, under normal use and service, for the following leng ths of time from the d ate of purch ase.
26.
An important point after buying a device TRENDnet TEW-509UB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEW-509UB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEW-509UB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEW-509UB you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEW-509UB will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEW-509UB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEW-509UB.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEW-509UB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEW-509UB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
