Instruction/ maintenance manual of the product TEG-S80Dg TRENDnet
Go to page of 11
TEG-S80Dg 1 .0 1 Quick Installation Guide.
T able of Contents V ersion 08.21.2009 English 1 1. Before Y ou Start 2. Hardware Installation 2 3. 3 1 LEDs T echnical Specifications T roubleshooting 4 5.
ENGLISH FRANÇAIS DEUTSCH ESP AÑOL ÐÓÑÑÊÈÉ 1. Before Y ou Start Package Contents ? ? Multi-Language Quick Installation Guide ? Power Cord ? Rubber Feet TEG-S80Dg System Requirements 1 ? Computer with Network adapter installed ? CA T-5e or CA T -6 Network Cable ? ? ? ? ? The surface must support at least 1.
ENGLISH FRANÇAIS DEUTSCH ESP AÑOL ÐÓÑÑÊÈÉ 2. Hardware Installation 2 1. Connect the Power Cord to the TEG-S80Dg and then to a power outlet. 2. Connect a CA T -5e or CA T-6 RJ-45 network cable from the computer to an available Ethernet port on the TEG-S80Dg.
ENGLISH FRANÇAIS DEUTSCH ESP AÑOL ÐÓÑÑÊÈÉ 3 3. LEDs Power Green: Power is on Not Illuminated: Power is off Link/ACT Green (Solid): Link to another device Green (Blinking): Activity is occurri.
Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T Network Media Ethernet: 2-Pair UTP/STP CA T-3, -4, -5 Fast Ethernet: 2-Pair UTP/STP CA T-5, -5e , -6 Gigabit : 4-Pair UTP/S.
After connecting the Switch to a power outlet, the LEDs do not turn on. Check the connection of the external power adapter to the TEG-S80Dg and the power outlet. Also check that the power outlet is receiving power . When I connect a computer to one of the ports on the Switch, the Link/ACT LED turns on, but I am not getting Gigabit speeds.
Limited W arranty - 5 Y ear Limited Warranty AC/DC Power Adapter, Cooling Fan and Power Supply carry 1 year warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
W ARRANTIES EXCLUSIVE : IF THE TRENDNET PRODUCT DOES NOT OPERA TE AS W ARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, A T TRENDNET'S OPTION, REP AIR OR REPLACE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2009. All Rights Reserved. TRENDnet. P r o d u c t War r a n t y Re g i s t r a t i o n Please take a moment t o regis ter your pr oduct online.
An important point after buying a device TRENDnet TEG-S80Dg (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEG-S80Dg yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEG-S80Dg - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEG-S80Dg you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEG-S80Dg will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEG-S80Dg, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEG-S80Dg.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEG-S80Dg. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEG-S80Dg along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
