Instruction/ maintenance manual of the product TEG-S8 TRENDnet
Go to page of 11
TEG-S5 TEG-S8 Quick Inst allation Guide.
T able of Contents T able of Contents V ersion 01.24.2007 English ...................................................................................................... T echnical Specifications ........................................................
Installation Requirements Application A computer with a network adapter properly installed CA T 5e or 6 Network Cable The surface must support at least 1.5 Kg for the Switch The power outlet should be within 1.82 meters (6 feet) of the Switch Package Contents 1.
2. Hardware Installation English 2 1. Connect the AC Power Adapter to the TEG-S5/TEG-S8 and then to a power outlet. 2. Connect a CA T -5e or CA T -6 RJ-45 network cable from the computer to an available Ethernet port on the TEG-S5/TEG-S8. Y our installation is now complete.
3 Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet Protocol CSMA/CD Data T ransfer Rates Ethernet: 10Mbps (Half-Duplex), 20Mbps (Ful.
4 DC inputs Switching Power: 5V DC, 2.5A Linear Power: 12V DC, 1A T emperature Operating: 0 ~ 50 C ° ° Dimensions (L x W x H) mm 150 x 105 x 33 Weight 225g Physical and Environmental Humidity Certification Operating: 10% ~ 90% CE, FCC Power Consumption TEG-S5: 5.
5 T roubleshooting Q1: A1: Q2: A2: Q3: A3: Q4: A4: After connecting the Switch to a power outlet, the LEDs do not turn on. Check the connection of the external power adapter to the When I connect a computer to the Switch port, the PWR and LINK/ACT LED turns on, but the 100/1000Mbps LED remains off or the light is yellow .
Limited W arranty - 5-Y ear W arranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
W ARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERA TE AS W ARRANTED ABOVE, THE CUST OMER’S SOLE REMEDY SHALL BE, A T TRENDNET’S OPTION, REP AIR OR REPLACEMENT .
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2007. All Rights Reserved. TRENDnet. P r o d uc t War r a n t y Re gi s t r a ti o n Please take a moment t o regist er your product online.
An important point after buying a device TRENDnet TEG-S8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEG-S8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEG-S8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEG-S8 you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEG-S8 will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEG-S8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEG-S8.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEG-S8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEG-S8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
