Instruction/ maintenance manual of the product TEG-ECTX TRENDnet
Go to page of 10
TEG-ECT X TEG-ECSX H/W : V1 Quick Inst allation Guide.
Table of Contents T able of Contents V ersion 10.30.2008 English ..................................................................................................... T roubleshooting ...................................................................
System Requirements Application Package Contents 1. Before Y ou Start English 1 ? ? Driver CD-ROM ? Multi-Language Quick Installation Guide TEG-ECTX/TEG-ECSX ? ? CD-ROM Drive ? CPU: 300MHz or above / .
2. How to Install English 2 1. Insert the Driver CD-ROM into your computer ’s CD-ROM Drive. Note: Do not connect the TEG-ECTX/TEG-ECSX to your computer until instructed to do so. 2. Click Run autorun.exe (Windows Vista only). 4. Click Next . Then follow the InstallShield Wizard instructions.
English 3 9. Drivers will install automatically . 7. Shutdown your computer and then open your computer's case. 8. Insert the PCIe card firmly into an available PCIe slot, and then turn ON the computer and wait until the Windows desktop appears. 6.
English 4 Connect the TEG-ECTX to your network 1. Connect a RJ-45 network cable from the computer to an available Ethernet port on your Gigabit router or Gigabit switch.
Y our installation is now complete. For detailed information regarding the TEG- configuration and advanced settings, please refer to User Guide on the Utility and Driver CD- ROM. TEG-ECTX/ ECSX Register Y our Product T o ensure the highest level of customer service and support, please take a moment to register your product Online at: www .
6 Q1: A1: Q2: A2: Q3: A3: Q4: A4: Q5: A5: Windows doesn't recognize my new hardware. What should I do? First, verify that your computer meets the system requirements as specified in Section 1 . Second, go to Start -> Control Panel -> System > Hardware -> Device Manager .
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Copyright ©2008. All Rights Reserved. TRENDnet. P r o d u c t War r a n t y Re g i s t r a t i o n Please take a moment t o regis ter your pr oduct online.
An important point after buying a device TRENDnet TEG-ECTX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEG-ECTX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEG-ECTX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEG-ECTX you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEG-ECTX will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEG-ECTX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEG-ECTX.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEG-ECTX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEG-ECTX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
