Instruction/ maintenance manual of the product N300 Wireless PoE Access Point TRENDnet
Go to page of 17
TEW-638PAP 1 .0 1 Quick Installation Guide.
T able of Contents V ersion 01.08.2010 English 1 1. Before Y ou Start 2. Hardware Installation 2 3. Power-over-Ethernet Installation 8 1 T roubleshooting 10.
1. Before Y ou Start ? ? A computer with a network adapter or wireless adapter properly installed ? A router with an available network LAN port ? An available DHCP Server – routers usually have a built-in DHCP server ? Power over Ethernet (PoE) Switch (e.
2. Hardware Installation 1. Insert Utility CD-ROM into your computer's CD-ROM drive. 2. Click Run Setup.exe (Windows 7/Vista only) 2 Note: 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network.
3 5. Connect the provided RJ-45 cable from a LAN port on your Router to the LAN port on the TEW-638P AP . Then click Next . 6. Connect a RJ-45 cable from a LAN port on your Router to the Ethernet port on your computer . 8. Select the TEW-638P AP from the list and then click Configure .
4 9 . Enter a password and then click Login . The default password is admin . 10. Select Access Point and then click Next . Note: For AP Client setup, please refer to the User's Guide for step by step instructions. The User's Guide can be found on this product's CD-ROM.
5 13 . Enter a SSID and then click Next . By default, the SSID is TRENDnet638P AP . 14. Select the desired Wireless Mode and then click Next . 15. Select a Security Mode and then click Next (example shows WP A-PSK). 16. Select the desired WP A mode, enter characters for your Pre-Shared key and then click Next .
6 17 . Click Save (optional). 18. Give the file a name, then click Save (optional). 19. Click Configure to apply the settings. 20. Click Exit ..
7 Note : to connect a wireless computer to the TEW-638P AP , please refer to the first question in the troubleshooting section. Y our Installation is complete Register Y our Product T o ensure the highest level of customer service and support, please take a moment to register your product Online at: www .
8 3. Power-over-Ethernet Installation Using the TEW-638P AP with a PoE switch 1 . Connect a RJ-45 cable from the Power-Over- Ethernet Switch (e.g. TRENDnet TPE-80WS) to the LAN port on the Access Point. 2. V erify that the wireless, LAN, and power LEDs are on.
9 Using the TEW-638P AP with the TPE-1 1 1GI 2. Connect the Injector to the DC 48V IN connector on the TPE-1 1 1GI. Then connect the Power Cord to an outlet. 1 . Connect the Power Cord to the Injector . 3. Connect a CA T -5 cable from a switch to the TPE-1 1 1GI's DA T A IN port.
1. All the settings are correct, but I can not make a wireless connection to the Access Point. Double check that the wireless LED on the Access Point is lit. 2. Power cycle the Access Point. Unplug the power to the Access Point. Wait 15 seconds, then plug the power back in.
5. I do not have a DHCP server or DHCP is disabled on my network and I am unable to configure the TEW-638P AP . What should I do? 1. Go to the TCP/IP settings on your computer and assign a static IP address on your computer's network adapter in the subnet of 192.
.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.
GPL/LGPL üldinformatsioon See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General Public License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik Litsentsiga.
Copyright © 2010. All Rights Reserved. TRENDnet..
An important point after buying a device TRENDnet N300 Wireless PoE Access Point (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet N300 Wireless PoE Access Point yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet N300 Wireless PoE Access Point - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet N300 Wireless PoE Access Point you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet N300 Wireless PoE Access Point will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet N300 Wireless PoE Access Point, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet N300 Wireless PoE Access Point.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet N300 Wireless PoE Access Point. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet N300 Wireless PoE Access Point along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
