Instruction/ maintenance manual of the product UR48DT Traulsen
Go to page of 12
This T raulsen unit is built to our highest quality standards. We build our refrigerators, freezers and heated cabinets this way as a matter of pride. This philosophy has made Traulsen the leader in commercial refrig- eration since 1938.
T ABLE OF CONTENTS The serial tag is a permanently affixed sticker on which is recorded vital electrical and refrigeration data about your T raulsen product, as well as the model and serial number . This tag is located in the upper right interior compartment on all Spacesaver reach- in refrigerator , freezer and undercounter models.
-2- II. RECEIPT INSPECTION All T raulsen products are factory tested for perfor- mance and are free from defects when shipped. The utmost care has been taken in crating this product to protect against damage in transit.
III. d - SHELF PINS: The unit is supplied with shelves and shelf pins in- stalled. Check all shelf pins to assure they are tight- ened down as they may have come loose during ship- ping. Rotate the pins clockwise until they are secured against the side of the cabinet.
-4- III. INST ALLA TION (continued) III. k - BUIL T -IN INST ALLA TION: Select a proper location for your unit away from ex- treme heat or cold. Due to the unique air flow of the unit, the Spacesaver can be built-in or used as a free- standing unit.
-5- III. INST ALLA TION (continued) III. l - ELECTRICAL OUTLET INST ALLA TION: Refer to the diagram below to determine the correct location for the electrical outlet for built-in units.
V. a - ADJUSTING THE TEMPERA TURE: The refrigeration system has been properly charged and tested at the factory . Plug the unit into the power outlet to determine if the compressor(s) is running. If not, check the “ ON/OFF ” switches behind the louver assembly .
VI. c - REPLACING THE GASKETS (cont ’ d): gently hitting with a mallet until the gasket is com- pletely seated in place (see figure 9 for proper gasket placement). NOTE: The gasket may appear too large, but if it is installed as indicated above it will slip into place.
-8- IX. TROUBLE SHOOTING GUIDE FIND YOUR PROBLEM HERE REMEDY 1. Condensing unit fails to start. a. Check if line has been disconnected. b. Check switch behind louvers. 2. Condensing unit operates for a. Are doors closing properly? prolonged periods or continuously .
X. W ARRANTY INFORMA TION ST ANDARD DOMESTIC W ARRANTY TRAULSEN & CO., INC. warrants new equipment to the original purchaser , when installed within the United States against defective material and workmanship for one (1) year from the date of original installation.
XI. INDEX -10- A Adjusting The T emperature 6 B BTU’s 3 Built-In Installation 4 C Casters 2 Cleaning - The Condenser 5 Cleaning - The Exterior 6 Cleaning - The Interior 6 Clearance 3 Compressor Hold.
T raulsen 4401 Blue Mound Road Fort Worth, TX 76106 Phone: (800) 825-8220 Fax-Svce: (817) 740-6757 W ebsite: www .traulsen.com HOURS OF OPERA TION: Monday thru Friday 7:30 am - 4:30 pm CST Quality Ref.
An important point after buying a device Traulsen UR48DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Traulsen UR48DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Traulsen UR48DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Traulsen UR48DT you will learn all the available features of the product, as well as information on its operation. The information that you get Traulsen UR48DT will certainly help you make a decision on the purchase.
If you already are a holder of Traulsen UR48DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Traulsen UR48DT.
However, one of the most important roles played by the user manual is to help in solving problems with Traulsen UR48DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Traulsen UR48DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
