Instruction/ maintenance manual of the product TRAULSEN RBC100 Traulsen
Go to page of 12
-NOTICE- This Manual is prepared for the use of qualified personnel. It should not be used by those not properly qualified. Before proceeding with any work, you should read, in its entirety , the procedure you wish to perform in order to determine if you have the necessary tools and skill required to perform the procedure.
T able of Contents 1 TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER BASIC SER VICE GUIDE One button start means safe food every cycle! Page Programming The Control....................................................... 2 General T roubleshooting...
1. From the Main Menu Screen press MORE , then SETUP . The display will change to the Password Screen. 2. From the Select Supervisor Screen, use the UP and DOWN arrows to the left and right of P ASSWORD to select 57 . Press ENTER . The display will change to the Set Up Screen.
General T roubleshooting 3 TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER BASIC SER VICE GUIDE PROBLEM: Extended or unsafe chill times. a. Is the door closed properly? If not close door .
4 General T roubleshooting (cont’d.) PROBLEM: Incorrect date/time shown on display and/or printouts. a. Incorrect time and/or date setting. Correct date and/or time settings. b. Control issue. Replace control. PROBLEM: Defrost appears to have occured before chill cycle completion.
1. Remove thumb screws & control cover (see fig. 1). 2. Remove Five (5) #2 Phillips head screws (see fig. 2). 3. Disconnect ten (10) electrical connections (see fig. 3). 4. Re-assemble in reverse order . 5. Restore power . 6. If previously authorized by T raulsen, insert original control in pre addressed mailer and return to T raulsen.
6 Replacing Either Printer W ARNING DISCONNECT THE ELECTRICAL POWER T O THE MACHINE AND FOLLOW PROPER LOCKOUT/T AGOUT PROCEDURES. 1. Remove four (4) thumb screws & control cover (see fig. 1). 2. Remove paper or labels and spindle 3. Remove two (2) #2 Phillips head screws securing the printer (see fig.
1. Access the control boardand/or printers by removing four (4) thumb screws & control cover (see fig. 1). 2. Remove the control board (see page 5) and/or printers (see page 5 and 6) which might be effected moisture or grease. 3. Spray any electrical contacts (see fig.
8 V erifying The Control V ersion 1. On the main menu display press MORE. 2. Press SETUP . The SELECT SUPER VISOR screen will be displayed. 3. Enter P ASSWORD/PIN 85. 4. Press the top left, top right, and bottom right buttons at the same time. 5. The control version will appear on the display .
Locating Refrigerant Leaks 9 TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER BASIC SER VICE GUIDE 1. Access the refrigeration system, recovering remaining refrigerant per EP A guidelines. 2. Connect the low (BLUE) side of gauge manifold to schrader valve.
10 Resetting The Control Refers T o Older Control V ersions Only If memory reaches capacity during a chill cycle there is potential that some printout data could be incorrect (date & time). This will reset on it’s own, however to do so manually .
4401 Blue Mound Road, Fort Worth, TX 76106 • (800) 825-8220 • www .traulsen.com TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER SER VICE GUIDE © 2010 T raulsen.
An important point after buying a device Traulsen TRAULSEN RBC100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Traulsen TRAULSEN RBC100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Traulsen TRAULSEN RBC100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Traulsen TRAULSEN RBC100 you will learn all the available features of the product, as well as information on its operation. The information that you get Traulsen TRAULSEN RBC100 will certainly help you make a decision on the purchase.
If you already are a holder of Traulsen TRAULSEN RBC100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Traulsen TRAULSEN RBC100.
However, one of the most important roles played by the user manual is to help in solving problems with Traulsen TRAULSEN RBC100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Traulsen TRAULSEN RBC100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
