Instruction/ maintenance manual of the product RFS126NUT Traulsen
Go to page of 12
This T raulsen unit is built to our highest quality standards. We build our refrigerators, freezers and heated cabinets this way as a matter of pride. This philosophy has made Traulsen the leader in commercial refrig- eration since 1938.
T ABLE OF CONTENTS The serial tag is a permanently affixed sticker on which is recorded vital electrical and refrigeration data about your T raulsen product, as well as the model and serial number .
-2- II. RECEIPT INSPECTION All T raulsen products are factory tested for perfor- mance and are free from defects when shipped. The utmost care has been taken in crating this product to protect against damage in transit. All interior fittings have been carefully secured and the legs or casters are boxed and strapped inside to prevent damage.
III. f - INST ALLING THE CONDENSA TE EV AP (cont ’ d): holes on the exterior bottom towards the rear of the cabinet. Then, using the four (4) screws provided, at- tach the mounting rails to the cabinet bottom (the end flange is to be up and be facing towards the cabinet rear).
IV . a - CLEANING THE CONDENSER (cont’d): two screws located on both sides at the bottom of the louver assembly (see figure 6). Once the screws are removed, the panel can be pivoted upwards allowing full access to the front facing condenser (see figure 7).
V. a - ADJUSTING THE SHEL VES: For shelves mounted on pins, first select the desired location and remove the white plastic covers in the interior back and sides by rotating them counter-clock- wise. Remove the shelf pins by rotating them counter- clockwise.
-6- VII. SPECIAL TY PRODUCTS - FISH FILE MODELS VII. a - FISH FILE APPLICA TION: T raulsen fish file models are specifically designed for the storage of fresh fish or poultry in a moist refriger- ated environment, packed in crushed ice, thereby pre- venting dehydration and bacteria growth.
-7- VIII. SPECIAL TY PRODUCTS - BLAST FREEZER MODELS VIII. a - BLAST FREEZER APPLICA TION: The roll-in blast freezer models were specifically de- signed for batch processing, where quick freezing of cooked product is required to help prolong shelf life.
-8- TROUBLE IX. a - INTRODUCTION: Most T raulsen models are constructed with a high quality 430 series, 20 gauge stainless steel exterior finish (front, sides and doors). The interior finish on these same mod- els are constructed using 300 series stainless steel.
-9- X. CARE OF ST AINLESS STEEL (cont ’ d) X. c - CLEANING SUMMAR Y - DO ’ S & DONT ’ S: To summarize the proper cleaning of T raulsen refrigeration products, always follow the below guidelines. DO use only cleaning products designed for stainless steel, or cleaning products which do not contain chlorides.
XI. TROUBLE SHOOTING GUIDE FIND YOUR PROBLEM HERE REMEDY 1. Condensing unit fails to start. a. Check if cord & plug has been disconnected. 2. Condensing unit operates for a. Are doors closing properly? prolonged periods or continuously . b. Dirty condenser or filter .
T raulsen 4401 Blue Mound Road Fort Worth, TX 76106 Phone: (800) 825-8220 Fax-Svce: (817) 740-6757 W ebsite: www .traulsen.com HOURS OF OPERA TION: Monday thru Friday 7:30 am - 4:30 pm CST Quality Refrigeration © 2004 T raulsen - All Rights Reserved XII.
An important point after buying a device Traulsen RFS126NUT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Traulsen RFS126NUT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Traulsen RFS126NUT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Traulsen RFS126NUT you will learn all the available features of the product, as well as information on its operation. The information that you get Traulsen RFS126NUT will certainly help you make a decision on the purchase.
If you already are a holder of Traulsen RFS126NUT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Traulsen RFS126NUT.
However, one of the most important roles played by the user manual is to help in solving problems with Traulsen RFS126NUT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Traulsen RFS126NUT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
