Instruction/ maintenance manual of the product KROGER RBC100 Traulsen
Go to page of 8
TRAULSEN BLAST CHILLERS training guide Models: RBC50, RBC100 and RBC200.
T able of Contents 1 TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER TRAINING GUIDE One button start means safe food every cycle! Page Programming The Control....................................................... 2 Placing Probes/Loading Pans......
1. From the Main Menu Screen press MORE , then SETUP . The display will change to the Password Screen. 2. From the Select Supervisor Screen, use the UP and DOWN arrows to the left and right of P ASSWORD to select 57 . Press ENTER . The display will change to the Set Up Screen.
• Place probes into thickest part of the product. • With product like chicken the probe should not be placed where it is touching bone. • With full pans of product such as casseroles locate the probe in pan center . • In all cases probe tip should not touch pan bottom.
1. After placing product in chiller press BY TIME . 2: Press CHILL . 3: Adjust cycle time using the buttons to the left and right of CYCLE TIME . 4: Press ST ART . NOTE : It is necessary to manually verify and log product temp(s) before and after chilling in order to complete documentation.
1. When a probe reaches target temp (37 ° F) an alarm will sound for 30-seconds. The display the will continuously flash DONE . 2. Press the button alongside the probe flashing DONE . 3. The print menu will appear . Press... - RECORD to receive a paper printout.
6 Care & Cleaning Probes Interior/Exterior Condenser 1. Remove probes by turning the circular locking ring which secures these inside the chiller . 2. W ash/sanitize probes. NOTE : Probes can be immersed in water during cleaning. 3. Allow probes to air dry before replacing in chiller .
4401 Blue Mound Road, Fort Worth, TX 76106 • (800) 825-8220 • www .traulsen.com TR99999 Kroger version rev . 06/10) T roubleshooting 7 TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER TRAINING GUIDE PROBLEM: Upon starting a chill cycle, probe temp(s) displayed appear cooler than expected (i.
An important point after buying a device Traulsen KROGER RBC100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Traulsen KROGER RBC100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Traulsen KROGER RBC100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Traulsen KROGER RBC100 you will learn all the available features of the product, as well as information on its operation. The information that you get Traulsen KROGER RBC100 will certainly help you make a decision on the purchase.
If you already are a holder of Traulsen KROGER RBC100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Traulsen KROGER RBC100.
However, one of the most important roles played by the user manual is to help in solving problems with Traulsen KROGER RBC100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Traulsen KROGER RBC100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
