Instruction/ maintenance manual of the product TN-GLC-BX-U Transition Networks
Go to page of 7
*Unless otherwise indicated, the distances listed are the typical maximum cable distance. The actual maximum cable distances are dependent upon the physical characteristics of the network installation. **Transition Networks' SFP modules fully comply with the Multi-Sourcing Agreement (MSA).
TN-GLC-xx-xx SFPs 2 Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600—24 hours Part Number Port Description TN-GLC-BX-U 1000Base-BX, Simplex LC 1310 nm Tx/1490 nm Rx, single mode, single fiber 10 km (6.2 miles) * TN-GLC-BX-D 1000Base-BX, Simplex LC 1490 nm Tx/1310 nm Rx, single mode, single fiber 10 km (6.
TN-GLC-xx-xx SFPs 4 Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours) Connect fiber cable to media converter as shown. Connect fiber cable to other device (media converter , hub, etc.) as shown RX TX RX TX Installing the fiber cables 1.
TN-GLC-xx-xx SFPs 6 Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours) Fiber cable The physical characteristics must meet or exceed IEEE 802.3z ™ specifications. Singlemode fiber (recommended) : 9 µm Multimode fiber (recommended) : 62.
TN-GLC-xx-xx SFPs 8 Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours) T echnical Specification For use with Transition Networks Model TN-GLC-xxx or equivalent. Standard: IEEE 802.3 2003; ANSI X3.297-1997 TN-GLC-FE-xxx and TN-GLC-GE-xxx: Compiant with IEEE 802.
TN-GLC-xx-xx SFPs 10 Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours) Declaration of Conformity N ame of Mfg: Transition Networks 10900 Red Circle Drive, Minnetonka MN 55343 U.
Trademark notice All trademarks and registered trademarks are the property of their respective owners. Copyright restrictions © 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.
An important point after buying a device Transition Networks TN-GLC-BX-U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks TN-GLC-BX-U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks TN-GLC-BX-U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks TN-GLC-BX-U you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks TN-GLC-BX-U will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks TN-GLC-BX-U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks TN-GLC-BX-U.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks TN-GLC-BX-U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks TN-GLC-BX-U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
