Instruction/ maintenance manual of the product SSDTF1014-100 Transition Networks
Go to page of 6
COMPLIANCE INFORMA TION UL Listed C-UL Listed (Canada) CISPR22/EN55022 Class A + EN55024 CE Mark FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
SSDTF10xx IN THE NETWORK NOTE: THE SSDTF10xx REQUIRES A CSU BETWEEN THE MEDIA CONVERTER AND THE PUBLIC TELEPHONE NETWORK. NOTE: T1/E1 MEDIA CONVERTERS MUST BE USED IN PAIRS.
CABLE SPECIFICA TIONS (continued) T wisted-Pair Copper Cable Twisted pair connection requires two active pairs. The two active pairs in a T1/E1 network are pins 1 & 2 and pins 4 & 5. Use only dedicated wire pairs (such as blue/white & white/blue, orange/white & white/orange) for the active pins.
INST ALLA TION CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting switch and when installing Media Converter Slide-in- Module in the Media Conversion Center. Failure to observe this caution could result in damage to, and subsequent failure of, the Media Converter Slide-in- Module.
F AUL T ISOLA TION and CORRECTION If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
INST ALLA TION (continued) Install Cable COPPER T1 100 OHM (RJ-45 CONNECTOR) 1. Locate or build twisted-pair cables that are compliant with specifications on page 10, with RJ-45 plug connectors at both ends. 2. Ensure that MDI/MDI-X switch is set according to network conditions.
An important point after buying a device Transition Networks SSDTF1014-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SSDTF1014-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SSDTF1014-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SSDTF1014-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SSDTF1014-100 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SSDTF1014-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SSDTF1014-100.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SSDTF1014-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SSDTF1014-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
