Instruction/ maintenance manual of the product SBFTF10XX-15X Transition Networks
Go to page of 7
User’ s Guide SBFTF10xx-15x Stand-Alone Media Converter • Copper to Fiber • 10/100 Bridging (2-Port) • 10Base-T/100Base-TX to 100Base-FX The SBFTF10xx-15x 2-port Ethernet/Fast Ethernet bridgin.
2 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch. Failure to observe this caution could result in damage to, and subsequent failure of, the media converter.
RJ-45 port on the other device (switch, work station, etc.) RJ-45 port on the media conv erter 4 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Install the Twisted-Pair Copper Cable 1. Locate or build 10Base-T or 100Base-TX copper cables with male, RJ-45 connectors installed at both ends.
6 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation - Continued Product Features Auto-Negotiation The Auto-Negotiation feature allows the media converter to automatically configure itself to achieve the best possible mode of operation over a link.
8 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications The physical characteristics must meet or exceed IEEE 802.3™ specifications. Fiber Cable Bit Error Rate: <10-9 Single mode fiber (recommended): 9 µm Multimode fiber (recommended): 62.
10 SBFTF10xx-15x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2002-2003, 2005 Transition Networks.
An important point after buying a device Transition Networks SBFTF10XX-15X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SBFTF10XX-15X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SBFTF10XX-15X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SBFTF10XX-15X you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SBFTF10XX-15X will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SBFTF10XX-15X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SBFTF10XX-15X.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SBFTF10XX-15X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SBFTF10XX-15X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
