Instruction/ maintenance manual of the product RS485-CF-0x Transition Networks
Go to page of 4
The TRANSITION Networks RS485-CF-0x series serial-port fiber extension Media Converters extend distances between RS-485 or RS-482 nodes for up to two (2) kilometers over multimode fiber or up to twenty (20) kilometers over singlemode fiber .
INST ALLA TION Set Switches Use small flatblade screwdriver or similar device to set recessed switches according to site installation. 1. Set the 2-wire /4-wire slide switch to the 4-wire setting to enable the "receive – RS485 4 wire, RS422 and receive + RS485 4 wire, RS422" pair for RS422 4 wire full duplex operation.
F A UL T ISOLA TION and CORRECTION If the Media Converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
TECHNIC AL SPECIFIC A TIONS Standards ANSI/TIA/EIA-485-A, IEEE 802.3™ Data Rate 1000 baud to 500,000 baud. (No rate setting is required. The Media Converter adjusts automatically to the baud rate.) Case Dimensions 4.7" x 3.0" x 1.8" (119mm x 76mm x 46mm) Shipping Weight 3 pounds (1.
An important point after buying a device Transition Networks RS485-CF-0x (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks RS485-CF-0x yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks RS485-CF-0x - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks RS485-CF-0x you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks RS485-CF-0x will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks RS485-CF-0x, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks RS485-CF-0x.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks RS485-CF-0x. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks RS485-CF-0x along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
