Instruction/ maintenance manual of the product N-FX-ST-01 Transition Networks
Go to page of 16
Ethernet ™ 10/100BASE-SX, 100BASE-FX PCI Network Interface Cards N-FX-ST -01, N-FX-SC-01, N-FX-MT -01, N-SX-ST -01, N-SX-SC-01, N-SX-MT -01, ND-FX-ST -01, ND-FX-SC-01, ND-FX-MT -01, ND-SX-ST -01, ND-SX-SC-01, ND-SX-MT -01 USER’S GUIDE Adapter Hardware Installation .
ADAPTER HARDW ARE INST ALLA TION Follow Instructions outlined in the indicated personal computer user ’ s guide for installing PCI Bus add- in cards into a PCI slot that supports bus mastering. CAUTION: Heed the warnings in the PC user ‘s guide in regard to proper protection against static discharge.
PCI NETWORK INTERF ACE CARDS TRANSITION Networks Fiber -Optic PCI Network Interface Cards (Adapters) are 32-bit bus-mastering PCI cards that support both half-duplex and full-duplex operation and that comply with PCI Specifications, revision 2.1 and 2.
ADAPTER SOFTW ARE INST ALLA TION NOTE TRANSITION Networks Fiber -Optic PCI Network Interface Cards (Adapters) are shipped with one (1) CD driver disk containing software drivers for various network operating systems, diagnostic utilities, and electronic format documentation.
21. When the system comes up open Netowok Neighborhood by right clicking 22. Click on " Properties" 23. Highlight "T ransition LANart …." And , Click on "Properties" 24. Click on Advanced 25. Chose the properties as required by Network Administrator 26.
MICROSOFT WINDOWS 95 - SOFTW ARE UPGRADE 1. Power up the computer , and start W indows 95. 2. The following instruction is to update the driver for LANart network card. 3. Update the driver for T ransition Networks / LANart (EF A020X) - open the control panel by clicking "Start," then "Settings," then "Control Panel.
MICROSOFT WINDOWS 98 - NEW INST ALLA TION 1. Copy the appropriate device install script For NDIS3 MAC driver type copy A:Win98Nids3MacNetamd.inf C:WindowsInf For NDIS4 MINIPOR T driver type copy A:Win98Nids4MiniNetamd.inf C:WindowsInf 2. Shutdown W indows 98 and power -off the machine.
19. Double Click "system" 20. Click "Device Manager" 21. Double Click "Network Adapter" 22. Highlight " …." And , Click on "Properties" 23. Click on Advance 24. Chose the properties as required by the Network Administrator 25.
MICROSOFT WINDOWS 98 - SOFTW ARE UPGRADE 1. Power up the computer and start W indows 98. 2. Update the driver for the PCI card - open the control panel by clicking "Start," then "Settings," then "Control Panel." 3. Double Click "system" 4.
MICROSOFT WINDOWS NT 4.0 - NEW INST ALLA TION 1. Install the T ransiton (EF A020X series) Adapter card in accordance with your personal computer user's manual.
MICROSOFT WINDOWS NT 4.0 - SOFTW ARE UPGRADE 1. Start W indows NT , and open the control panel by clicking "Start," then "Settings," then "Control Panel." 2. Double Click on "Network." 3. Click on the Adapters tab.
NOVELL NETW ARE 4.X / 5.X - NEW INST ALLA TION 1. Power off the machine. 2. Install the T ransiton / LANart (EF A020X ) Adapter card in accordance with your personal computer user's manual. Again, follow all handling procedures to avoid electro-static discharges.
NOVELL NETW ARE 4.X/ 5.X - SOFTW ARE UPGRADE/ADDING NETWORK CARD TO AN EXISTING SYSTEM. 1. Shutdown Netware Server and power -off the machine. 2. Install the T ransiton / LANart (EF A020X series) Adapter card in accordance with your personal computer user's manual.
MICROSOFT WINDOWS NT 4.0 - PERMANET SER VER The PermaNet Server feature allows users to configure a pair of LANart PCI device based NIC as primary and secondary , and provides the ability to automatically fail-over from primary adapter to the secondary adapter should the link status of the primary go down 1.
INST ALLING SUNSOFT SOLARIS DRIVER (X86 ENVIRONMENT) 1. Login as root 2. Copy from the media /solaris/pnt-solaris.pkg to /var/spool/pkg 3. At the prompt. T ype, Pkgadd – d pnt-solaris.pkg and follow the instruction on the screen 4. W ait for the process to complete 5.
COMPLIANCE INFORMA TION CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
An important point after buying a device Transition Networks N-FX-ST-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks N-FX-ST-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks N-FX-ST-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks N-FX-ST-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks N-FX-ST-01 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks N-FX-ST-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks N-FX-ST-01.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks N-FX-ST-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks N-FX-ST-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
