Instruction/ maintenance manual of the product FD-CD-01 Transition Networks
Go to page of 2
The TRANSITION Networks Ethernet™ CDDI to FDDI media converters connect CDDI unshielded twisted pair cable to FDDI multimode OR to FDDI singlemode fiber-optic cable. Media converter models are selected according to the fiber mode required at the site.
MDI switch setting MDI-X switch setting 100 meters 100 meters 2 kilometers - multimode 20 kilometers - singlemode Straight Through/Crossover Cable Requirements and Pin Specifications The two active pairs in a CDDI network are pins 1 & 2 and pins 7 & 8.
An important point after buying a device Transition Networks FD-CD-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks FD-CD-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks FD-CD-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks FD-CD-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks FD-CD-01 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks FD-CD-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks FD-CD-01.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks FD-CD-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks FD-CD-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
