Instruction/ maintenance manual of the product ETHERNET POCKET HUB 401 Transition Networks
Go to page of 8
For assistance in installing, using, or maintaining the TRANSITION Networks Model 0401 Ethernet Pocket Hub, contact TRANSITION Networks T echnical Support at: (800) 260-1312 or contact your local distributor .
Compliance Information UL Listed FCC Regulations This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
T able of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The 0401 Ethernet Pocket Hub . . . . . . . . . . . . . . . . . . . . . . .1 0401 Ethernet Pocket Hub Connectors and Indicators . . . . . .2 2 SITE CONSIDERA TIONS . .
Model 0401 10 1 Ethernet™ Pocket Hub™ 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks 0401 Ethernet Pocket Hub.
Model 0401 2 9 Ethernet™ Pocket Hub™ 5. MAINTENANCE W ARNING: DO NOT , UNDER ANY CIRCUMST ANCES, open and attempt to repair the 0401 Pocket Hub. Failure to observe this warning could result in personal injury or death from electrical shock. NOTE: Failure to observe the above warning will immediately void the warranty.
Model 0401 8 3 Ethernet™ Pocket Hub™ 4. OPERA TION The 0401 Pocket Hub normally requires no intervention beyond occasionally monitoring the Power and Link/Transmit LEDs. Monitoring Power LED The green Power LED is illuminated when the Pocket Hub is connected to power.
Model 0401 4 7 Ethernet™ Pocket Hub™ Connecting Pocket Hub to Powered PC NOTE: The 0401 Pocket Hub is powered ON when connected, through the AUI connector, to a powered PC. After the AUI is connected to a PC, the green Power LED is illuminated. To power the 0401 pocket hub: 1.
Model 0401 6 5 Ethernet ™ Pocket Hub ™ 3. INST ALLA TION The 0401 Ethernet Pocket Hub is designed to draw power from the AUI port of a PC or hub. The 0401 Pocket Hub MUST be connected to an AUI port BEFORE the 10BaseT ports are allowed to be powered and active.
An important point after buying a device Transition Networks ETHERNET POCKET HUB 401 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks ETHERNET POCKET HUB 401 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks ETHERNET POCKET HUB 401 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks ETHERNET POCKET HUB 401 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks ETHERNET POCKET HUB 401 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks ETHERNET POCKET HUB 401, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks ETHERNET POCKET HUB 401.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks ETHERNET POCKET HUB 401. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks ETHERNET POCKET HUB 401 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
