Instruction/ maintenance manual of the product E-TX-FX-0600 Transition Networks
Go to page of 6
COMPLIANCE INFORMA TION UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
E-TX-FX-XX00 IN THE NETWORK Each media converter port in the multi-port media converter operates independently over one isolated twisted-pair copper/fiber-optic cable link.
CABLE SPECIFICA TIONS (continued) COPPER CABLE Each RJ-45 connector requires 2 pairs of Category 5 rated cable. The 50-pin Telco connector requires 24 pairs of Category 5 rated cable. Either shielded twisted-pair (STP) or unshielded twisted-pair (UTP) can be used.
INST ALLA TION Install E-TX-FX-xx00 at Site WARNING: During the site installation, handle the E-TX-FX-xx00 in such a way that the E-TX-FX-xx00 does not fall. Failure to observe this warning could result in injury to personnel and/or equipment damage. To install the E-TX-FX-xx00 in 19-inch rack cabinet: NOTE: Brackets and screws are provided.
F AUL T ISOLA TION and CORRECTION If the multi-port media converter fails, isolate and correct the fault by determining the answers to the following questions and then taking the indicated action: 1.
OPERA TION Use the status LEDs to monitor multi-port media converter operation in the network. NOTE: Each 100BASE-TX/ 100BASE-FX media converter port is identified by a number located just above the fiber connector(s) for that 100BASE-TX /100BASE-FX port connection.
An important point after buying a device Transition Networks E-TX-FX-0600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks E-TX-FX-0600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks E-TX-FX-0600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks E-TX-FX-0600 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks E-TX-FX-0600 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks E-TX-FX-0600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks E-TX-FX-0600.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks E-TX-FX-0600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks E-TX-FX-0600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
