Instruction/ maintenance manual of the product E-100BTX-SX-01 Transition Networks
Go to page of 2
The TRANSITION Networks Ethernet™ E-100BTX-SX-01 series 100BASE-TX t o 100BASE-SX media converters connect 100BASE-TX unshielded twisted pair cable to 850 nm 100BASE-SX multimode fiber-optic cable, using either an ST connector ( E-100BTX-SX-01) o r a n S C connector ( E-100BTX-SX-01(SC) ) .
MDI switch setting MDI-X switch setting 100 meters 100 meters 2 kilometers - multimode Switch Settings and Cable Requirements The two active pairs in a 100BASE-TX network are pins 1 & 2 and pins 3 & 6. Use only dedicated wire pairs (such as blue/white & white/blue, orange/white & white/orange) for the active pins.
An important point after buying a device Transition Networks E-100BTX-SX-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks E-100BTX-SX-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks E-100BTX-SX-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks E-100BTX-SX-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks E-100BTX-SX-01 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks E-100BTX-SX-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks E-100BTX-SX-01.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks E-100BTX-SX-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks E-100BTX-SX-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
