Instruction/ maintenance manual of the product E-100BTX-FX-05 Transition Networks
Go to page of 7
User’ s Guide E-100BTX-FX-05 Stand-Alone Media Converter • Fast Ethernet • Copper to Fiber • 100Base-TX to 100Base-FX • Extended Temperature Transition Networks E-100BTX-FX-05 Fast Ethernet media converter connects 100Base- TX shielded or unshielded twisted-pair copper cable to 100Base-FX fiber-optic cable.
2 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 The media converters with the “HT” extension in the part number can be used in an extended temperature environment from -25°C to 65°C (-13°F to 149°F).
4 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- C ontinued Installing the fiber cable 1. Locate a 100Base-FX compliant fiber cable with male, two-stranded TX to RX connectors installed at both ends.
6 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation -- C ontinued P ause Control The Pause feature can improve network performance by allowing one end of the link to signal the other to discontinue frame transmission for a set period of time to relieve buffer congestion.
8 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Standard Models -- continued E-100BTX-FX-05(XLW) 1550 nm single mode Fiber-optic Transmitter Power: min: 0.0 dBm max: 5.0 dBm Fiber-optic Receiver Sensitivity: min: -36.
10 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the media converter fails, isolate and correct the fault by determining the answers.
12 Compliance Information UL Listed C-UL Listed CISPR22/EN55022 Class A + EN55024 CE Mark FCC regulations This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
An important point after buying a device Transition Networks E-100BTX-FX-05 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks E-100BTX-FX-05 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks E-100BTX-FX-05 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks E-100BTX-FX-05 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks E-100BTX-FX-05 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks E-100BTX-FX-05, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks E-100BTX-FX-05.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks E-100BTX-FX-05. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks E-100BTX-FX-05 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
