Instruction/ maintenance manual of the product CETTF10XX-200 Transition Networks
Go to page of 7
Installation . . . . . . . . . . . . . . . . . .2 Operation . . . . . . . . . . . . . . . . . . .5 Cable Specifications . . . . . . . . . . .7 Technical Specifications . . . . . . . .9 Troubleshooting . . . . . . . . . . . . .10 Contact Us . . . . . .
CETTF10xx-200 2 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch and the jumper. Failure to observe this caution could result in damage to, and subsequent failure of, the media converter.
CETTF10xx-200 4 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Connect the Fiber Cable 1. Locate or build IEEE 803.2 ™ compliant 10Base-FL fiber cable with male, two-stranded TX to RX connectors installed at both ends.
CETTF10xx-200 6 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation -- Continued Product Features AutoCross ™ The AutoCross feature detects and configures the twisted-pair copper port on the CETTF10xx-200 media converter to the correct straight-through (MDI) or crossover (MDI-X) configuration.
CETTF10xx-200 8 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 3: (minimum requirement) Gauge 24 to 22 AWG Attenuation 11.5 dB/100m @ 5-10 MHz Maximum Cable Distance 100 meters Category 5: (recommended) Gauge 24 to 22 AWG Attenuation 22.
CETTF10xx-200 10 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2000, 2001, 2004, 2005 Transition Networks.
An important point after buying a device Transition Networks CETTF10XX-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks CETTF10XX-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks CETTF10XX-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks CETTF10XX-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks CETTF10XX-200 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks CETTF10XX-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks CETTF10XX-200.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks CETTF10XX-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks CETTF10XX-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
