Instruction/ maintenance manual of the product CBFTF10XX-15X Transition Networks
Go to page of 7
* Typical maximum cable distance. (Actual distance is dependent upon the physical characteristics of the network.) (TX) = transmit (RX) = receive ** SBFTF1029- 150 and SBFTF1029- 151 are intended to be installed in the same network where one is the local converter and the other is the remote converter.
2 CBFTF10xx-15x Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00) INST ALLA TION CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch and the jumper(s) and when installing the Slide-in-Module.
4 CBFTF10xx-15x Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00) INST ALLA TION -- Continued Install the Twisted-Pair Copper Cable 1. Locate or build IEEE 803.2 ™ compliant 10Base-T or 100Base-TX cables, with straight-through RJ-45 cable, and with straight-through RJ-45 connectors installed at both ends.
6 CBFTF10xx-15x Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00) OPERA TION - Continued Product Features Auto-Negotiation The Auto-Negotiation feature allows the Media Converter to be used with 10Base-T and 100Base-TX twisted-pair ports.
8 CBFTF10xx-15x Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00) C ABLE SPECIFICA TIONS The physical characteristics must meet or exceed IEEE 802.3™ specifications. Fiber Cable Bit Error Rate: <10-9 Singlemode fiber (recommended): 9 µm Multimode fiber (recommended): 62.
10 CBFTF10xx-15x Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00) F A UL T ISOLA TION AND RECO VER Y If the Media Converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2002-2003 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.
An important point after buying a device Transition Networks CBFTF10XX-15X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks CBFTF10XX-15X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks CBFTF10XX-15X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks CBFTF10XX-15X you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks CBFTF10XX-15X will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks CBFTF10XX-15X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks CBFTF10XX-15X.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks CBFTF10XX-15X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks CBFTF10XX-15X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
