Instruction/ maintenance manual of the product TS2G-8GCF266 Transcend
Go to page of 80
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 1 Description The Transc end CF 266X is a High Speed Com pact Flash Card with high quality Flash Mem ory assemble d on a printed circuit board.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 2 T ranscend.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 3 Block Diagram.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 4 Pin A ssignments a nd Pin Ty pe.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 5 Note: 1) These signals are required only for 16 bit acces ses and not required when installed in 8 bit systems. Devices sh ould allow for 3-stat e signals not to consume current.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 6 Signal Descri ption.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 7.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 8.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 9.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 10.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 11 Electrical Specification The f ollowing tables indicate a ll D.C. Characteristics f or the Comp actFlash Stora ge Card. Unless otherwise stated, conditions are: Vcc = 5V ±10% Vcc = 3.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 12 Output Drive Ty pe Output Drive Characteristics .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 13 Signal Interface.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 14 Notes: 1 ) Control Signals: each c ard shall presen t a load to the s ocket no larger than 50 p F 10 at a DC curren t of 700 A low state and 1 50 A high sta te, including pull-resistor.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 15 Ultra DMA Electrical Requirements Host and Card signal capacitanc.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 16 Printed Cir cuit Board (PCB) Trace Requirements for U ltra DMA On any PCB for a host or device s upporting Ultra DMA: The longest D[ 15:00] trace shall be no more t han 0.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 17 A tt ribute Memory Read Timing Specification.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 18 Configuration Register (Attribute Memory) Write Timing Specificatio n.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 19 Common Memory Read T iming Specificati on.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 20 Common Memory Write Timing Specification.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 21 I/O Input (Read) Timing Specificati on.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 22.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 23 I/O Output (Write) Timi ng Specification.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 24.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 25 T rue IDE PIO Mode Read/Wri te Timing Specification.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 26.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 27 True IDE Ultra DMA Mode Read/Write Timing Specification Table: Ultra .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 28 Notes: 1) All timing measurement switching points ( low to high and high t o low) shall be ta ken at 1.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 29 Notes: 1) The parameters t UI, tMLI : (Ultra DMA Data-I n Burst Device Te.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 30 Data-In Burst H ost Termination Timing), and t LI indicate send er-to-recipient or recipient-to-sender interlocks, i.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 31 Note: 1) The s ender shall be t ested while driving an 18 inch long, 80 conductor cable with PVC insulation material.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 32 Card Configuration The CompactFlash Storage Cards and CF+ Cards are identified by appropriate information in the Card Informat ion Struct ure (CIS).
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 33 Ta ble: CF+ Card Re gister and Memory Space Decoding Table: CF+ Card Conf.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 34 A ttribute Memory Function Attribut e memory is a s pace whe re Compa.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 35 Configuration Option Register (Base + 00h in Att ribute Memory).
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 36 Card Configuration and Sta tus Register (Base + 0 2h in A ttribute Me.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 37 Pin Replac ement Register (Base + 0 4h in A ttribute Memory).
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 38 Socket an d Copy Reg ister (Base + 06h in A ttribute Memory).
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 39 I/O Transfer Function The I/O transfer t o or from the Compact Flash Storage or CF+ C ard can be either 8 or 16 bits.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 40 Common Memory Transfer Func tion The Common Memory transf er to or from the CompactFlash Storage or CF+ Card can be either 8 or 16 bits.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 41 True IDE Mode I/O Tra nsfer Function The CompactFlash Storage Card and CF+ Card c an be configured in a True IDE Mode of operation.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 42 Metaformat Overview The goal of the Met aformat is to des cribe the requirements and c apabili ties of the Compac tFlash Storage Card and CF+ Card as thoroughly as possible.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 43 CF-A TA Driv e Register Se t Definition and Protocol The Compact Flash St.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 44 I/O Primary and Secon dary A d dress Co nfig urations Table: Primary .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 45 Contigu ous I/O Mapp ed Addressin g W hen the system dec odes a cont .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 46 Memory Mapp ed Addressing W hen the CompactFlash Storage Car d regist.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 47 CF-ATA R egisters The following sect ion describes t he hardware registers used by the host sof tware t o issue commands t o the CompactFlash device.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 48 Fea ture Register (Ad dr ess - 1F1h[171h]; Offset 1, 0Dh W rite Only ) This register provides information re garding feature s of t he CompactFlash Storage Card t hat the hos t c an utilize.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 49 Bit 3 (HS3): when operating in the Cylinder, Head, Sector mo de, this is bit 3 of the head number. It is Bit 27 in the Logical Block Address mode.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 50 Dev ice Control Register (A ddress - 3F6h[376h]; Off set Eh) This register is used t o contr ol the Compact Flash Storage Card interrupt req uest and t o issue an ATA soft reset t o the card.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 51 Card (Drive) A ddress Register (A ddress 3F7h[37 7h]; Off set Fh) This register is provided for compat ibil ity with the AT disk dr ive interface.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 52 CF-A TA Command Set CF-ATA Command Set summarizes the CF-ATA command set with the paragraphs that follow describing the individual commands and t he task file for each.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 53 Definitions: FR = Features Register SC = Sect or Count R egisterS SN = Se.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 54 Execute D rive Diag nostic - 9 0h W hen the diagnost ic command is issued in a PCMCIA configuration mode, this command runs only on the CompactFlash Storage Card that i s address ed by the D rive/Head registe r.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 55 Flush Cache – E7h This command causes t he card to complete writing data f rom its cache. The card r eturns s tatus with RDY=1 and DSC=1 after the data in the w rite cache b uff er is written t o the media.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 56 Identi fy Device – Ech The Identif y D evice command enables the host to receive parameter information f rom t he Compact Flash Storage Card.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 57.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 58 Word 0: General Configuration This field indicat es the general charac teristics of the device.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 59 Word 1: D efault Number of C y l inders This field con tains t he number of t ranslated cylind ers in the default tra nslation mode.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 60 Translation Parameter s Valid Bit 0 shall be set t o 1 indicating t hat words 54 to 58 are valid and ref lect the c urrent n umber of cylinders, heads and sect ors.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 61 mode 4. Support for PIO m odes 5 and above ar e specific to Compact Flash are reported in word 163.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 62 Bit 2 of word 82 shall be s et t o zero; t he Removable Media feat ure set is not s upported. Bit 3 of word 82 shall be s et t o one; the Power Management featu re set is supported.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 63 Bit 1 of word 86 shall be set to zero; t he Compact Flash Storage Card does not support the Read DMA Queued and W r ite DMA Queued commands.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 64 Word 91: Adv anced power manage ment l ev el value Bits 7-0 of word 91 con tain the c urrent Advanced Power Management level sett ing.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 65 W ord 63: Multiword DMA tr ansfer a nd 6.2.1.6. 19: W ord 64: Advanced PIO transfe r modes support ed. Bits 2-0: Advanced True I DE PIO Mode Support Indicates the maximum Tr ue I DE PIO mode supported by the card.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 66 Word 164: CF A dvanced PCMCIA I/O and Memory Timing Modes Capabiliti .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 67 Idle I mmediate - 95h or E1h This command causes the CompactFlash Storage Card to set BSY , enter the Idle mode, clear BSY and generate an interrupt.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 68 Read B uffer - E4h The Read Buff er comma nd enab les the h ost to read the current content s of the CompactFlash Storage Card’s sector buffer .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 69 Read Mu ltiple - C4h Read S ector(s) - 20h or 21h Read V erif.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 70 Recalibrat e - 1Xh Requ est Sense - 03 h The ext ended error code is returned to t he host in the Error Register.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 71 Seek - 7Xh Set Features – EFh.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 72 Feature Suppo rted Features 01h and 81h are used to enable an d clear 8 bit dat a transfer modes in True I DE Mode.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 73 Set Multiple M ode - C6h Set Sleep Mode- 99h or E6h Standby -.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 74 Standby Immediate - 9 4h or E0h Tra nslate Sect or - 87h Translat.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 75 Wear L eve l - F5h Write Buf fer - E8h Write DMA – CA h.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 76 Write Long Sect or - 32h or 33h Write Multiple Comma nd - C5h .
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 77 Write Sec tor(s) - 30h or 31h Write Sec tor(s) without Erase - 38.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 78 Error Posting.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 79 Error and St atus Register summarize s the valid status and err or value for all t he CF -ATA C ommand set.
T T T S S S 2 2 2 G G G ~ ~ ~ 8 8 8 G G G C C C F F F 2 2 2 6 6 6 6 6 6 266X CompactFlas h Card Transcend Inform ation Inc. 80 SMA RT Data Str ucture BYTE F / V Decripti on 0-1 X Revision code 2-3.
An important point after buying a device Transcend TS2G-8GCF266 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transcend TS2G-8GCF266 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transcend TS2G-8GCF266 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transcend TS2G-8GCF266 you will learn all the available features of the product, as well as information on its operation. The information that you get Transcend TS2G-8GCF266 will certainly help you make a decision on the purchase.
If you already are a holder of Transcend TS2G-8GCF266, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transcend TS2G-8GCF266.
However, one of the most important roles played by the user manual is to help in solving problems with Transcend TS2G-8GCF266. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transcend TS2G-8GCF266 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
