Instruction/ maintenance manual of the product Air Filtration System Trane
Go to page of 8
32-5038-01 Trane CleanEffects TM Whole House Air Filtration System User’s Information Guide 32- 5038- 01 Congratulations – Your TRANE CleanEffects TM air filtration system is the most advanced, innovative and effective whole house air filtration system on the market today.
32-5035-02 2 User’ s Infor mation Figure 1. COMPONENTS OF THE TRANE CLEANEFFECTS TM 1) Pre-filter - Traps large particles such as hair and lint before they can enter the cell section. 2) Field Charger - Charges the contaminants. Only to be serviced by a qualified technician.
32-5035-02 3 User’ s Infor mation SEQUENCE OF OPERA TION You will need to turn off your air cleaner to clean the filters. After cleaning, turn on the unit by pressing and releasing the Power button. The backlit Power and Filter Reset button will illuminate along with first green LED indicating power is present.
32-5035-02 4 User’ s Infor mation not remove the door until all lights are off. ♦ Disconnect the power cable, if required, and place the door in a secure location. ♦ Rotate the two latches and remove the door. PRE-FILTER CLEANING: The pre-filter can be vacuumed (recommended) or washed clean.
32-5035-02 5 User’ s Infor mation SET-UP MODE You can customize the performance of the air cleaner to meet the needs of your home and family using the set-up mode. To enter the set-up mode, press and hold BOTH the Power and the filter RESET buttons for a minimum of 5 seconds.
32-5035-02 6 User’ s Infor mation CHANGING THE SETTINGS While in the set-up mode, press the Power button once to begin cycling through the various setting options in the following order: Pre-Filter Cleaning Interval Setting (Figure 4) One or more of the GREEN LED lights will illuminate.
32-5035-02 7 User’ s Infor mation FAULT INDICA TORS The air cleaner has been designed to continually monitor itself to insure it is working properly.
32-5038-01 P.I. Trane has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice.
An important point after buying a device Trane Air Filtration System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Trane Air Filtration System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Trane Air Filtration System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Trane Air Filtration System you will learn all the available features of the product, as well as information on its operation. The information that you get Trane Air Filtration System will certainly help you make a decision on the purchase.
If you already are a holder of Trane Air Filtration System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Trane Air Filtration System.
However, one of the most important roles played by the user manual is to help in solving problems with Trane Air Filtration System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Trane Air Filtration System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
