Instruction/ maintenance manual of the product TL-SG1008P TP-Link
Go to page of 16
User Guide TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE Rev ˖ 1.0.0 7106504137.
.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when th e equipment is operated in a commercial environment.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorit y to operate the equipment. CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENT Package Contents ...................................................... 1 Chapter 1. Introductio n of the Product .......................... 2 1.1 Overview of the Produc t ...................................... 2 1.2 Convention ...............
1 Package Contents The following items should be found in your box: ¾ One TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE ¾ One DC Power Adapter ¾ Four rubber cushions to be used under the Switch ¾ This User Guide Note Make sure that the box contains the above items.
2 Chapter 1. Introduction of the Product Thank you for choosing the TL-S G1008P 8-Port Gigabit Desktop Switch with 4-Port PoE. 1.1 Overview of the Product The TL-SG1008 P 8-Port Gigabit Desktop Switch.
3 1.2 Convention The Switch or TL-SG1008P mentioned in this User Guide stands for TL-SG1008P 8-Po rt Gigabit Desktop Switch with 4-Port PoE without any explanation. 1.3 Features ¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.
4 Chapter 2. Installation During the installation procedure, please only use the accessories equipped with the Switch. 2.1 Mounting the Switch on a Desk To install the Switch, please follow the steps: 1) Place the Switch on a flat desk. 2) Remove the adhesive backing papers from the rubber cushions.
5 2) Then, the 1000Mbps and Link/Act LED indicators will flash momentarily for one second, which represents a resetting of the system. Note If the LED indicators don’t respond as described above, please check the power supply and its connection. Chapter 3.
6 Name Status Indication On (green) There is a PoE PD connected to the p ort, which supply power su ccessfully. Flashing (green) The PoE power circui t may be in sh ort or the power current may be overloaded. PoE ports (ports1~4) Off No PD is connected to the corresponding port, or no power is supplied a ccording to the pow er limits of the port.
7 Note If all PoE PDs power consumption is >= 53W, a priority * will be arranged among the PoE ports like port-1 = port-2 = port-3 > port-4, then the system will cut off the power of the lowest-priority port. *Priority: This function will help protect the system when the system power is overloaded.
8 ¾ PoE Ports (1-4): These ports support PoE function which integrates power and data onto one Ethernet cable. Once the device you connect to the Switch is identified, the Switch will supply power through the PoE port, and then you can use it as a 10/100/1000Mbps Auto-Negotiation RJ45 Ethernet port.
9 Appendix A: Specifications General Standard IEEE802.3, IEEE80 2.3u, IEEE802.3a b IEEE802.3x, IEEE802.3a f Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex ) 20Mbps (Full Duplex) Fast Ethernet: 100Mbps.
10 MAC Address Learning Automatically learning, automatically aging 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Filter Rate 1000Base-T: 1488000pps/Port 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Forward Rate 1000Base-T: 1488000pps/Port Environmental and Physical Power Consumption 5.
An important point after buying a device TP-Link TL-SG1008P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-SG1008P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-SG1008P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-SG1008P you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-SG1008P will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-SG1008P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-SG1008P.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-SG1008P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-SG1008P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
