Instruction/ maintenance manual of the product TL-SG1005D TP-Link
Go to page of 12
User Guide TL-SG1005D TL-SG1008D 5/8-Port Gigabit Desktop Switch Rev:2.0.2 7106503707.
I COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Ot her brands and product names are trademarks or registered trademarks of their respective holders.
II FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of t he FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
III 1 ） This device may not cause harmful interference. 2 ） This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications no t expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.
1 Package Contents The following items should be found in your package: ¾ One TL-SG1005D/TL-SG1008 D Switch ¾ One Power Adapter ¾ This User Guide Note: The wall-mounting screws are not provided with our product. Please contact your distributor if any of the listed items are damaged or missing.
2 Chapter 1 Introduction of the Product Thank you for choosing the TL-SG1005D/TL -SG1008D 5/8-port Gigabit Desktop Switch. 1.1 Overview of the Product Powered by the Gigabit Ethern et Technology, TL-S.
3 1.2 Features ¾ Supports Green Ethernet technology to implement power saving features ¾ Complies w ith IEEE802.3, IEEE802.3u, IEEE802.3ab standards ¾ 5/8 10/100/1000Mbps Auto-S ens ing RJ45 ports supporting Auto-MDI/MDIX ¾ Supports IEEE802.
4 The Switch’s LEDs are located on the front panel: ¾ Power LED: This indicator will light up when the Sw itch powers up. ¾ LEDs (1~8): The LED indicates Link/Active status. The corresponding LED indicator will light solid green when connected to a network device.
5 Chapter 3 Installation The Switch can be either located on a desktop or mounted on a wall. 3.1 Mounting the Switch on a Desk To locate the Switch on a desktop, please follow these steps: 1) Place the Switch on a flat desk. 2) Inspect the Power Adapter carefully and make sure that it is properly connected to a power source.
6 3.3 Power On Power on the Switch and it will automatically initialize and its LED indicators will respond as follows: Name Time Status Indication Power All the time On Power on 1 st second On N/A 2 nd second Off N/A Off No device connected to the corresponding port.
7 Appendix A: Specifications General Standards IEEE802.3, IEEE80 2.3u, IEEE802.3ab Topology Star Protocol CSMA/CD Ethernet: 10Mbps (Half Dup lex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Dup.
8 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Port Frame Forward Rate 1000Base-T: 1488000pps/Port Environmental and Physical Operating Temperature 0 ~40 ℃ (32 ~104 ℉ ) Storage Temperature -40 ~70 ℃ (-40 ~158 ℉ ) Operating Humidity 10%~90% non-condensing Storage Humidity 5%~90% non-condensing Appendix B: T roublesho oting 1.
An important point after buying a device TP-Link TL-SG1005D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-SG1005D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-SG1005D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-SG1005D you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-SG1005D will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-SG1005D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-SG1005D.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-SG1005D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-SG1005D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
