Instruction/ maintenance manual of the product Eurorack Behringer
Go to page of 15
V e r s i o n 1 . 0 O c t ober 2003 Users Manual ENGLISH EURORACK UB12 22FX - PRO.
2 EURORACK UB1222FX -PRO This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 EURORACK UB1222FX -PRO UB1222FX-PRO EURORACK Ultra Low-Noise Design 16-Input Mic/Line Mixer with Premium Mic Pre- amplifiers, FBQ Feedback Detection System and 24-Bit Multi-FX Processor s Ultra low-.
4 EURORACK UB1222FX -PRO 1. INTRODUCTION Congratulations! In purchasing the BEHRINGER EURORACK you have acquired a mixer whose small size belies its incredible versatility and audio performance.
5 EURORACK UB1222FX -PRO This way, what once used to be a labor-intensive search for feedback frequencies is now an activity that even a child could master.
6 EURORACK UB1222FX -PRO 1.3.2 Initial operation Be sure that there is enough space around the unit for cooling purposes and to avoid over-heating. Please do not place your mixing console on high-temperature devices such as radiators or power amps. The console is connected to the mains via the supplied power cable.
7 EURORACK UB1222FX -PRO and lower band are 12 kHz and 80Hz respectively. The mid band is configured as a peak filter with a center frequency of 2.5 kHz. Unlike shelving filters, the peak filter processes a frequency range that extends upwards and downwards around its middle frequency.
8 EURORACK UB1222FX -PRO 2.2 Stereo channels 2.2.1 Channel inputs Fig. 2.5: Stereo channel inputs Each stereo channel features two line-level inputs on 1/4" connectors for left and right channels. Channels 9/10 and 11/12 can also be used in mono if you only use the connector labeled L.
9 EURORACK UB1222FX -PRO 2.3.2 Monitor send and FX send connector Fig. 2.7: Aux send connectors MON and FX MON SEND Connect the input of your monitor power amp or an active monitor system here to make the monitor mix audible to the musicians on the stage.
10 EURORACK UB1222FX -PRO Fig. 2.10: 2-track connectors CD/T APE INPUT The CD/TAPE INPUT RCA connectors are provided for connecting a 2-track machine (e.g. DAT recorder) or also a CD player. They can also be used as stereo line input. Alternatively, the output signal of a second EURORACK or BEHRINGER ULTRALINK PRO MX882 can also be connected.
11 EURORACK UB1222FX -PRO + Connect microphones before you switch on the phantom power supply. Please do not connect microphones to the mixer (or the stagebox/ wallbox) while the phantom power supply is switched on. In addition, the monitor/PA loudspeakers should be muted before you activate the phantom power supply.
12 EURORACK UB1222FX -PRO 3. DIGITAL EFFECTS PROCESSOR AND XPQ SURROUND FUNCTION 3.1 Digital effects processor.
13 EURORACK UB1222FX -PRO 4. INSTALLATION Fig. 4.1: 1/4" TS footswitch connector 4.2.1 Audio connections Please use commercial RCA cables to wire the 2-track inputs and outputs. You can, of course, also connect unbalanced devices to the balanced input/outputs.
14 EURORACK UB1222FX -PRO 5. SPECIFICATIONS Mono inputs Microphone inputs (IMP Invisible Mic Preamp) T ype XLR, electronically balanced, discrete input circuitry Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted @ 50 Ω source resistance -131 dB / 133.
15 EURORACK UB1222FX -PRO 6. WARRANTY 6. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3.
An important point after buying a device Behringer Eurorack (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer Eurorack yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer Eurorack - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer Eurorack you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer Eurorack will certainly help you make a decision on the purchase.
If you already are a holder of Behringer Eurorack, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer Eurorack.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer Eurorack. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer Eurorack along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
