Instruction/ maintenance manual of the product TL-SF1008P TP-Link
Go to page of 16
User Guide TL-SF1008P 8-Port 10/100Mbps Desktop PoE Switch Rev ： 1.0.0 7106503865.
.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence when the equipment is operated in a commercial environment.
2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CONTENT Package Contents ...................................................... 1 Chapter 1. Introductio n of the Product .......................... 2 1.1 Overview of the Produc t ...................................... 2 1.2 Convention ...............
1 Package Contents The following items should be found in your box: ¾ One TL-SF1008P 8-Port 10/100Mbps Desktop PoE Switch ¾ One DC Power Adapter ¾ Four rubber cushions to be used under the Switch ¾ This User Guide Note Make sure that the box contains the above items.
2 Chapter 1. Introduction of the Product Thank you for choosing the TL-SF1008P 8-Port 10/100Mbps Desktop PoE Switch. 1.1 Overvie w of the Product The TL-SF1008P 8-Port 10/100Mbps Desktop PoE Switch provides the seamless network connection, which integrates 100Mbps Fast Ethernet and 10Mbps Ethernet net work capabilities.
3 1.2 Convention The Switch or TL-SF1008P menti oned in this User Guide stands for TL-SF1008P 8-Port 10/100 Mbps Desktop PoE Switch without any explanation.
4 Chapter 2. Installation During the installation procedure, please only use the accessories equipped with the Switch. 2.1 Mounting the Switch on a Desk To install the Switch, please follow the steps: 1) Place the Switch on a flat desk. 2) Remove the ad hesive backing papers from the rubber cushions.
5 2.2 Power On The TL-SF1008P Switch can be used with DC po wer supply. Powering on the Switch, it will automatically initialize and its LED indicators will respond as follows: 1) Firstly, the Pow er LED indicator will light up.
6 Name Status Indication On (green) The Switch is powered on. Power Off The Switch is powered off. On (green) There is a PoE PD connected to the port, which supply power successfully. Flashing (green) The PoE power circuit may be in short or the power current may be overloaded.
7 Note If all PoE PDs power consumption is >= 53W, a prior ity* will be arranged among the PoE ports like port-1 = port-2 = port-3 > port-4, then the system will cut off the power of the lowest-priority port.
8 use it as a 10/100Mbps Auto-Negotiation RJ45 Ethernet port. The working status can be indicated by the corresponding LEDs on the front panel. ¾ Ethernet Ports (1-8 ): Besides the 4 PoE ports, the TL-SF1008P Switch is also equipped with the other four 10/100Mbps Auto-Negotiation RJ45 ports without PoE function.
9 Appendix A: Specifications General Standard IEEE802.3,IEEE802. 3u,IEEE802.3x,IEEE802. 3af Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex ) 20Mbps (Full Du plex) Data Transfer Rate Fast Etherne t: 10.
10 Environmental and Ph ysical Power Consumpt ion 5.8 Watts (max . no PD conn ected) 58 Watts (max . with 53 W PD connected) Operating Tem perature 0 ~40 ℃ (32 ~104 ℉ ) Storage Tempe rature -40 ~7.
An important point after buying a device TP-Link TL-SF1008P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-SF1008P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-SF1008P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-SF1008P you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-SF1008P will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-SF1008P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-SF1008P.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-SF1008P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-SF1008P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
