Instruction/ maintenance manual of the product TL-R460 TP-Link
Go to page of 18
1 Turn off all of your network devices, including your computer, Modem and the Router. Connect the WAN port on your Router to the Modem’s LAN port with an Ethernet cable. Connect your computer to the Port labeled 1~4 on the Router with an Ethernet cable.
2 LAN: Flashing or solid light if the corres p ondin g p ort is connected LAN: Flashing or solid light if the corresponding port is connected Turn on all of your network devices, including your computer, Mo dem and the Router then check to see if the LEDs of the Router display normally as the digram below describes.
3 Insert the provided Resource CD into your CD-ROM drive. The Setup Wizard will automatically pop up on your computer’s screen. Please select your product model and click Easy Se tup Assi stant Note To configure the device, you can either run the Resource CD (Method One), or run the Web based Quick Setup Wizard (Method Two).
4 The configuration has now been completed. Please skip to step 4 Testing the Internet Connection on page 7. Login A dialog box will prompt you for the User name and Password . Enter the default values and click OK . User name: admin Password: admin Click OK Open your web browser, type http://192.
5 Click Quick Setu p Click Next Click Next Internet Parameters Configuration C A Configuration for PPPoE Note If the dialog box does not pop up, please refer to T3 in the Troubleshoo ting guide on page 8. T2 will help you if you forget the password. Note 1.
6 Click Finish B Configuration for Dynamic IP If you select Dy nam ic I P , you will be prompted to the Quick Setup - Finish page. C Configuration for Static IP Quick Setup - Finish If you select Static IP , this page will then display.
7 The basic settings for your Router are completed. Please open the web browser and log on to the following websites: http://www.tp-link.com http://www.google.com If the above websites can be accessed, it indicates that your Router has been configured successfully and you can begin to enjoy the Internet.
8 T1. How do I restore my Router’s configuratio n to its factor y default settings? TL-R402M: TL-R460: TL-R860: T2. What can I do if I don’t know or forgot my password? 1) Restore the Router’s configuration to its factory default settings. If you don’t know how to do that, please refer to section T1 .
9 For Windows XP OS Go to Start > Control Panel , you will then see the following page. Click Network and Internet Connections Click Network Connections Click Properties Right-click Local Area Conn.
10 Select Obtain an IP address automaticall y Select Obtain DNS server address automaticall y Click OK Double-click Internet Protocol ( TCP/IP ).
11 For Windows Vista OS Click OK Go to Start > Se ttings > Control Panel , and then you will see the following page. Click View network status and tasks.
12 Click View status Click Properties.
13 Double-click Internet Protocol Version 4 ( TCP/IPv4 ) Select Obtain DNS server address automaticall y Select Obtain an IP address automatically Click OK.
14 For Windows 7 OS Go to Start > Settings > Control Panel , and then you will see the following page. Click View network status and tasks Click Change adapter settings Click Properties Right-cl.
15 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK.
16 2) Configure your I E browser Now, try to log on to the Web-based configuration page again after the above settings have been configured. If you still cannot access the configuration page, please restore your Router to factory default settings and reconfigure your Router following the instructions of this QIG.
17 2) Check to see if you can access the Router’s web management page. If you can, please follow the following steps to solve the problem. If you can’t, please set your computer referring to section T3 then try to access the Int ernet again. If the problem persists, please go to the next step.
Technical Support For more troubleshooting help, go to: www.tp-link.com/support/faq.asp T o download the latest Firmware, Driver, Utility and User Guide, go to: www.tp-link.com/support/download.asp For all other technical support, please contact us by using the following details: Global T el: +86 75 5 26504400 E-mail: support@t p-link.
An important point after buying a device TP-Link TL-R460 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-R460 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-R460 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-R460 you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-R460 will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-R460, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-R460.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-R460. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-R460 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
