Instruction/ maintenance manual of the product TD-8817B TP-Link
Go to page of 57
TD-8817B ADSL2/2+ Ethernet/USB Router Rev: 1.0.2 1910010019.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation.
Package Contents The following items should be found in your package: ¾ One TD-8817B ADSL2/2+ Ethernet/USB Router ¾ One AC power Adapter for TD-8817B ADSL2/2+ Ethernet/USB Router ¾ Quick Installati.
CONTENTS Chapter 1. Introduc tion ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.
4.6.3 Firmware....................................................................................................................... .. 46 4.6.4 System Restart ..........................................................................................
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 1 Chapter 1. Introduction Thank you for choosing the TD-8817B ADSL2/2+ Ethernet/USB Router . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 2 ¾ Built-in DHCP server. ¾ Built-in firewall, supports IP/MAC filter, Application filter and URL filter. ¾ Supports Virtual Server, DMZ host and IP Address Mapping. ¾ Supports Dynamic DNS, UPnP and Static Routing.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 3 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs are located on the front panel, they indicate the device’ s working status .
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 4 Method two ： Restore the default setting from “Maint enance-SysRestart” of the Router's Web-based Utility. ¾ LAN: Through the port, you can connect the Router to your PC or the other Ethernet network devices.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 5 Figure 2-3.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 6 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD- 8817B or connect your adapter to a Hub/Switch which has connected to the Router , you need to configure your PC’s IP address.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 7 Figure 3-2 Step 3: Select General tab, highlight Internet Protoc ol (TCP/IP), and then click the Properties button.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 8 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ) Note: You can c onfigure the PC to get an IP address aut omatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 9 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 10 Figure 3-7 Step 3: You will see Figure 3-8 as follow, please wait a moment. Figure 3-8 Step 4: After that, you will see Figure 3-9.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 11 Figure 3-9 ) Note: 1) All of the above settings are under windows XP. 2) If you want to pull out the USB device y ou must disconnect the network of USB first.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 12 Figure 3-10 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see Figure 3-11. Click the NEXT button. Figure 3-1 1 Step 2: Configure the time for the Router, and then click the NEXT button.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 13 Figure 3-13 Step 4: Configure the following opti ons provided by you r ISP: Username , Password , VPI , VCI and Connection Type . Then click Next . Figure 3-14 Step 5: Click NEXT to finish the Quick Start.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 14 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 15 Figure 4-2 ) Note: Click the other submenus System Log or Statistics in Figure 4-2, you will be able to view the system log a nd traffic statistics about the Router. 4.2 Quick S t art Please refer to " 3.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 16 4.3.1 Internet Choose “ Interface Setup → Internet ” menu, you can conf igure the parameters for WAN ports in the next screen (shown in Figure 4-4). Figure 4-4 ¾ ATM VC: ATM settings are used to connect to your ISP.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 17 • Status: If you want to use a designed VC, you should activate it. • VPI: Identifies the virtual path bet ween endpoints in an ATM ne twork. The valid range is from 0 to 255. Please input the value provided by your ISP.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 18 RIP2 format, the difference is that RIP2-M using Multicast, while RIP2-B using Broadcast format. • Direction: Select this option to s pecify the RIP direction. None is for disabling the RIP function.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 19 Figure 4-7 ¾ Username: Enter your username for your PPPoE/PPPoA connection. ¾ Password: Enter your password for your PPPoE/PPPoA connection. ¾ Encapsulation: For both PPPoE/PPPoA connection, y ou need to specify the type of Multiplexing, either LLC or VC Mux.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 20 4. Bridge Mode If you select this type of connection, the modem can be configured to ac t as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two s egments of the same physical LAN.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 21 Internet. • IP Address: Enter the Router’s local IP Address, then you can access to the Web-based Utility via the IP Address, the default val ue is 192.168.1.1. • IP Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 22 • Lease Time: The length of time for the IP lease. After the dynamic IP a ddress has expired, the user will be aut omatically assigned a new dynam ic IP address.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 23 4.4 Advanced Setup Choose “ Advanced Setup ”, you can see the next submenus: Figure 4-12 Click any of them, and you will be able to configure the corre sponding function. 4.4.1 Firewall Choose “ Advanced Setup → Firew all ” menu, and you will see the next screen (shown in Figure 4-13).
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 24 Figure 4-14 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-15). Figure 4-15 ¾ Destination IP Address: This parameter spec ifies the IP network address of the final destination.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 25 Figure 4-16 ¾ Virtual Circuit: Enter Virtual Circuit Index that you plan to setup for the NAT function. ¾ NAT Status: This field shows the current statu s of the NAT function for the current VC. You can go to the previous screen (shown in Figure 4-4) to activate the function.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 26 The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server, that you can make visible to t he outside world even though NAT makes your whole inside network appear as a single machine to the outside world.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 27 4.4.3.3. IP Address Mapping Choose “ Ad vanced Setup → NAT ”, select Multiple in Number of IPs . Click IP Address Mapping , then you can configure the Address Mapping Rule in Figure 4-20. The IP Address Mapping is for those VCs th at configured with multiple IPs.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 28 ¾ Address Mapping List: This displays the informati on about the Mapping addresses. To add a mapping rule: Step 1: Select the “Virtual Circuit” and Multiple fo r the “Number of IPs”. Then select the tab IP Address Mapping (shown in Figure 4-19).
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 29 Figure 4-21 ¾ QoS: Select this option to Activate/Deactivate the IP QoS on different types (IP ToS and DiffServ). ¾ Summary: Click the button to view t he configurations of QoS. ¾ Rule: Configure the rules for QoS.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 30 • Protocol ID: Select one among TCP/UDP, TCP, UDP or ICMP protocols for the application. • Vlan ID Range: Enter the Vlan range, then the rule will be effective to the selected Vlans. • IPP/DS Field: Select the type of the action to assign the priority.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 31 Figure 4-22 1. Assign VLAN PVID for each Interface Click Assign VLAN PVID for each Interface in Figure 4-22, you can assign the PVID for eac h interface in the next screen (shown in Figure 4-23). Figure 4-23 ¾ PVID: Each physical port has a default VID ca lled PVID (Port VID).
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 32 Figure 4-24 ¾ VLAN Index: Select the VLAN index for this VC. You can specify 8 gr oups in maximum. ¾ VLAN ID: This indicates the VLAN group. ¾ ATM VCs: Select the ATM VCs as members of VLAN , and if you leave the Tagged blank, the tag in frames will be deleted wh en transmitted from the VC.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 33 Figure 4-25 ¾ ADSL Mode: Select the ADSL operation mode wh ich your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type wh ich your ADSL connection uses.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 34 Figure 4-27 ¾ ACL: If Activated , the IP addresses which are contained in the Access Control List can access to the Router. If Deactivated , all IP addresses can access to the Router. ¾ ACL Rule Index: Select the ACL rule index for the entry.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 35 Figure 4-28 ¾ Filter Type Selection: Select the fil ter type fo r the configuration below. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 36 ) Note: Incoming means that IP traffic which is coming into the router, and the Outgoing means that IP traffic which is going out the router. ¾ IP/MAC Filter Rule Index: Select the Rule index for the IP Filter entry.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 37 ) Note: If you want to make the rule take ef fect, please select Ye s to active the rule. Step 3: Enter the “Source IP Address”, “Destinat ion IP Address”, “Subnet Mask” and “Port Number” in the corresponding field.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 38 4.5.2.2. MAC Filter Select IP /Mac Filter as the Filter type, and select MAC as the Rule type (shown in Figu re 4-29), then you can configure the filt er rules based on MAC address. Figure 4-29 ¾ Rule Type: Select MAC for the MAC Filter rule.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 39 Select the “MAC” as the Rule Type on the Filter screen (show in Figure 4-29). , Then you can configure the spec ific rule for the example.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 40 Figure 4-30 ¾ Filter Type Selection: Select the Application Filter for the next configuration. ¾ Application Filter: Activate or deactivate the function. ¾ ICQ & MSN & YMSG & Real Audio/Video: Select Allow or Den y for these applications.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 41 Figure 4-31 ¾ Filter Type Selection: Select the URL Filter fo r the next configuration. ¾ Active: Select “Yes” to make t he rule to take effect. ¾ URL Index: Select the index for the URL Filter entry.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 42 4.5.3 SNMP Choose “ Access Management → SNMP ”, you can see the SNMP screen. The Simple Network Management Protocol (SNMP) is used for exc hanging information between network devices.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 43 4.5.5 DDNS Choose “ Access Management → DDNS ”, you ca n configure the DDNS function in the screen (shown in Figure 4-34). The router o ffers a Dynamic Domain Name System ( DDNS ) feature. The feat ure lets you use a static host name with a dynamic IP address.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 44 Figure 4-35 ¾ CWMP: Select activate the CWMP function. ¾ URL: Enter the website of ACS which is provided by your ISP. ¾ User Name/Passwo rd: Enter the User Name and passw ord to login the ACS server.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 45 Figure 4-37 ) Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and the password is "admin". Admin has read/write access privilege.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 46 ) Note: The ADSL Router built-in some NTP Servers, when the Router connects to the In ternet, the Router will get the system time automatically from the NTP Serv er . Y ou can also configure the NTP Server address manually , and then the Router will get the time from the specific Server firstly .
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 47 to be used for upgrade. Figure 4-41 To upgrade the router's firmware, follow these instructions below: Step 1: Download a more recent firmware upgr ade file from the TP-LINK website ( www.tp-link.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 48 Figure 4-42 Step 2: Save the file as the appointed file (shown in Figure 4-43). Figure 4-43 To restore the Router’s settings: Step 1: Click the Browse button to locate the update file for the de vice, or enter the exact path in “New Romfile Location” field.
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 49 Figure 4-44 4.6.5 Diagnostic Choose “ Maintenance → Diagnostic ”, you can view the test res ults for the con nectivity of th e physical la yer and protocol layer for both LA N and WAN sides i n the screen (shown in Figure 4-45).
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 50 Figure 4-46 ) Note: Click the tab, and you will be able to get the corresponding information..
TD-8817B ADSL2/2+ Ethernet/USB Router User Guide 51 Appendix A: Specification General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.
An important point after buying a device TP-Link TD-8817B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TD-8817B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TD-8817B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TD-8817B you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TD-8817B will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TD-8817B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TD-8817B.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TD-8817B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TD-8817B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
