Instruction/ maintenance manual of the product TD-8616B TP-Link
Go to page of 22
TD-8616B ADSL2/2+ Ethernet Modem Rev: 1.0.1 1910010015.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation.
Package Contents The following items should be found in your package: ¾ One TD-8616B ADSL2/2+ Ethernet Modem ¾ One AC power Adapter for TD-8616B ADSL2/2+ Ethernet Modem ¾ Quick Installation Guide .
CONTENTS Chapter 1. Introduc tion ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 1 Chapter 1. Introduction Thank you for choosing the TD-8616B ADSL2/2+ Ethernet Modem . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 2 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device’s working status.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 3 ¾ LAN: Through the port, yo u can connect the Modem to your PC or the other Ethernet network devices. ¾ LINE: Through the port, you can connec t the Modem with the telephone. 2.3 Inst allation Environment ¾ The Product should not be locat ed where it will be exposed to moisture or excessive heat.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 4 Figure 2-3.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 5 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD- 8616B or connect your adapter to a Hub/Switch which has connected to the Router , you need to configure your PC’s IP address.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 6 Figure 3-2 Step 3: Select General tab, highlight Internet Protoc ol (TCP/IP), and then click the Properties button.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 7 Step 4: Configure the IP address ( Figure 3-4): Enter the IP address as 192.168.1.* (* is any value b etween 2 to 254, Subnet mask is 255.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 8 Figure 3-5 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Modem.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 9 Figure 3-7 After that you will see the page as follow when ADSL connection is OK. Figure 3-8.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 10 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 11 Figure 4-2 Choose “ Statistics → Traffic Statistics ” menu, and you will be able to view the traffic statistics about the Modem. Figure 4-3 4.2 Basic Setup Choose “ Basic Setup ”, you can see the next submenus: WAN Setting, LAN Setting and ADSL.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 12 Click any of them, and you will be able to configure the corre sponding function. 4.2.1 WAN Setting Choose “ Basic Setup → WAN Setting ” menu, you can configure the parameters for WAN ports in the next screen (shown in Figure 4-5).
TD-8616B ADSL2/2+ Ethernet Modem User Guide 13 Figure 4-6 ¾ LAN Setting: These are the IP settings of the LAN in terface for the device. These settings may be referred to as Private settings. You may chang e the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 14 4.3.1 Administration Choose “ Maintenance → Administrator ”, you can set new password for admin in the screen (shown in Figure 4-8). Figure 4-8 ) Note: 1) There is only one account that can access Web-Management interface.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 15 Step 2: Type the path and file n ame of the update file in to the “New Firmware L ocation” field. Or click the Browse button to locate the update file. Step 3: Click the UPGRADE button. ) Note: 1) New firmwar e vers ions are posted at www.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 16 Figure 4-1 1.
TD-8616B ADSL2/2+ Ethernet Modem User Guide 17 Appendix A: Specification General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.
An important point after buying a device TP-Link TD-8616B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TD-8616B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TD-8616B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TD-8616B you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TD-8616B will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TD-8616B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TD-8616B.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TD-8616B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TD-8616B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
