Instruction/ maintenance manual of the product RE200 TP-Link
Go to page of 40
RE200 AC750 WiFi Range Extender REV1.0.0 1910011070.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation.
CE Mark Warning This is a class B product. In a domestic environment , this product may cause radio interference, in which case the user may be required to take adequate measure s.
This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interfer ence-causing equipment regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Safety Information z When product has power button, the power butto n is one of the way to shut off the product; when there is no power button, the only way to co mpletely shut off power is to disconnect the product or the power adapter from the power source.
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: AC750 WiFi Range Extender Model No.: RE200 T rademark: TP-LINK We declare under our own resp.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ........................................................................................... 2 1.1 Product Ove rview .
RE200 AC750 WiFi Range Extender User Guide Package Contents The following items should be found in your package: ¾ RE200 AC750 WiFi Range Extender ¾ Ethernet Cable ¾ Quick Install ation Guide ¾ Resource CD for RE200 AC750 WiFi Range Extender, including: z This User Guide ) Note: Make sure that the package cont ains the above items.
RE200 AC750 WiFi Range Extender User Guide Chapter 1 Introduction 1.1 Product Overview The RE200 AC750 WiFi Range Extender is dedicat ed to Small Office/Home Office (SOHO) wireless network solutions.
RE200 AC750 WiFi Range Extender User Guide z LED Explanation: Name Status Indication Solid Green The Range Extender is connected to the 5G/2.4G wireless network of your main Router/AP, and the signal strength is strong. Solid Red The Range Extender is connected to the 5G/2.
RE200 AC750 WiFi Range Extender User Guide Chapter 2 Hardware Installation 2.1 Before Y ou Begin Please read this User Guide carefully before install ing and using the equipment. The operating distance range of your wirele ss connection can vary signific antly depending on the physical position of the wireless devices.
RE200 AC750 WiFi Range Extender User Guide z Use Web browser, such as Microsoft Internet Expl orer 5.0 or above, Netscape Navigator 6. 0 or above. z Operating temperature of t he Range E xtender should be 0 ℃ ~40 ℃ (32 ℉ ~104 ℉ ). z Operating humidity of the Range Exten der should b e 10%~90%RH (Non-condensing).
RE200 AC750 WiFi Range Extender User Guide Chapter 3 Quick Installation Guide This chapter will guide you to c onfigure your PC to communicate with the Range Extender and to configure and manage the RE200 AC750 WiFi Range Extender easily with a Web-based utility.
RE200 AC750 WiFi Range Extender User Guide 2. After successful login, there will pop up the Quick Setup Start page. Click Next to get the quick setup started. Figure 3-3 Quick Setup Start ) Note: If you want to go through the Qui ck Setup right away, you can click Exit and enter the main menu of the device.
RE200 AC750 WiFi Range Extender User Guide 5. A list of available 2.4GHz wireless network will appear. Check t he box before the SSID of your desired network, and then click Next .
RE200 AC750 WiFi Range Extender User Guide 7. A list of available 5GHz wireless network w ill appear. Check the box before the SSID of your desired network, and then click Next .
RE200 AC750 WiFi Range Extender User Guide 9. Double-check your wireless setting and network setting, when Figure 3-10 a ppears. If verified, click Fi nish to complete the Quick Setup. If there is anything wrong, click Back to return to the previous pages and reconfigure it.
RE200 AC750 WiFi Range Extender User Guide Figure 3-12 Quick Setup – Completed 11.
RE200 AC750 WiFi Range Extender User Guide Chapter 4 Configure the Device This Chapter describes how to configure y our Range Exten der via the web-based manageme nt page.
RE200 AC750 WiFi Range Extender User Guide Figure 4-1 S tatus ¾ Firmware Version - This field displays the current fi rmware version of the Range Extender. ¾ Hardw are Version - This field displays the current har dware version of the Range Extender.
RE200 AC750 WiFi Range Extender User Guide z Connection Status - It shows whether your device has been connected to a wireless network currently. " Connected " means the range extende r have connected to a wireless network, while if it shows "d isconnected", you can click " connect " to connect.
RE200 AC750 WiFi Range Extender User Guide 4.3.1 LAN Selecting Network > LAN will enable you to configure the IP parameters of Network on this page. Figure 4-3 LAN – Dynamic IP Figure 4-4 LAN – S tatic IP ¾ MAC Address - The physical address of the LAN por t, as seen from the LAN.
RE200 AC750 WiFi Range Extender User Guide 2. If you are not familiar with the setting item s in this page, it's st rongly recommended to keep the provided default values, otherwise may r esult in lower wireless network performance or even can't work.
RE200 AC750 WiFi Range Extender User Guide Figure 4-7 DHCP Settings – Off ¾ DHCP Server - Selecting the radio button before Auto/On/Off will disable/enable the DHCP server on your Range Extender.
RE200 AC750 WiFi Range Extender User Guide 4.3.3 DHCP Client List Selecting Network > DHCP Client List will enable you to view the Client Name , MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device ( Figure 4-8 ). Figure 4-8 DHCP Clients List ¾ ID - Here displays the index of the DHCP client.
RE200 AC750 WiFi Range Extender User Guide 4.4.1 Connect To Existing Network Selecting Wireless > Connect To Existing Network will guide you to set the basic parameters to get a connection to the internet (show in Figure 4-10 ).
RE200 AC750 WiFi Range Extender User Guide 4.4.3 Advanced Settings Selecting Wireless > Ad vanced Settings will allow you to do some advanced settings for the device in the following screen shown in Figure 4-12 . Figure 4-12 Extender Settings ¾ Beacon Interval - Specifies a value between 40- 1000 milliseconds.
RE200 AC750 WiFi Range Extender User Guide 4.4.4 High Speed Selecting Wireless > High Speed allows you to configure the wireless mode for your device (show in Figure 4-13 ). Figure 4-13 High Speed ¾ MAC Address - Shows the connected wirele ss station's MAC address.
RE200 AC750 WiFi Range Extender User Guide ¾ Current Status - The connected wireless station's r unning status, one of STA-AUTH / STA-ASSOC / STA-JOINED / W PA / WPA-PSK / WPA2 / WPA2 -PSK / AP -UP / AP-DOWN / Disconnected. ¾ Received Packets - pac kets received by the station.
RE200 AC750 WiFi Range Extender User Guide Figure 4-16 The System Tools menu 4.6.1 Firmware Upgrade Selecting System Tools > Firmware Upgrade allows you to upgrade the latest version of firmware for the device on the screen shown in Figure 4-17 . Figure 4-17 Firmware Upgrade New firmware versi ons are posted at http://www.
RE200 AC750 WiFi Range Extender User Guide 4.6.2 Factory Defaults Selecting System Tools > Factory Default allows you to restore the factor y default settings for the device on the screen shown in Figure 4-18 . Figure 4-18 Restore Factory Defaults Click Restore to reset all configuration se ttings to their default values.
RE200 AC750 WiFi Range Extender User Guide 4.6.4 Reboot Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure 4-20 .
RE200 AC750 WiFi Range Extender User Guide ) Note: The new user name and password must not exceed 14 characters in lengt h and must not include any spaces. Enter the new Pa ssword twice to confirm it. Click Save when finished. Click Clear All to clear all.
RE200 AC750 WiFi Range Extender User Guide Appendix A: Factory Defaults Item Default Value Common Default Settings Username admin Password admin IP Address 192.168.0.254 Subnet Mask 255.255.255.0 Domain http://tplinkextender.net Wireless SSID TP-LINK_Extender_2.
RE200 AC750 WiFi Range Extender User Guide Appendix B: Troubleshooting T 1 . How do I restore my Range Extender’s c onfiguration to its factory default settings? There are TWO methods available to restore the factory defaults.
RE200 AC750 WiFi Range Extender User Guide If you are unable to log in, please RESET the device, and then use the default IP address to get into the web-based configur ation page, reconfigure the device. 3) Feel free to contact our technical support, if the problem still persists.
RE200 AC750 WiFi Range Extender User Guide Appendix C: Specifications General Standards and Protocols IEEE 802.3, 802.3u, 802.11ac, 802.11n, 802.11b and 802.11g, TCP/IP, DHCP Safety & Emission CE Ports One 10/100M Auto-Negotiation LAN RJ45 port Wireless Frequency Band 2.
RE200 AC750 WiFi Range Extender User Guide Appendix D: Glossary ¾ 802.11ac - IEEE 802.11ac is a wireless comput er networking standard of 802.11.This specification will enable multi-st ation WLAN throughput of at least 1 gigabit per second .This is accomplished by extending the air interfac e concepts embraced by 802.
RE200 AC750 WiFi Range Extender User Guide ¾ Wi-Fi – A trademark of the Wi-Fi Alliance and the brand name for produc ts using the IEEE 802.11 family of standards.
An important point after buying a device TP-Link RE200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link RE200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link RE200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link RE200 you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link RE200 will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link RE200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link RE200.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link RE200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link RE200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
