Instruction/ maintenance manual of the product External ADSL ROUTER TD-8810 TP-Link
Go to page of 35
TD-8810/TD-8810B User Guide External ADSL ROUTER Rev ： 1.0.1.
II COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders.
III FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to pro-vide reasonable protection against harmful interference in a residential installation.
IV Package contents The following contents should be found in your box: ¾ One TD-8810/TD-8810B External ADSL ROUTER ¾ One AC power Adapter for TD-8810 External ADSL ROUTER ¾ One Resource CD for TD-.
V COMMENT Chapter 1. Introducti on ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.
TD-8810 External ADSL Router User Guide 1 Chapter 1. Introduction 1.1 Product Overview TP-LINK® TD-8810/TD-8810B External ADSL ROUTER is the latest product designed and manufactured by TP-LINK TECHNOLOGIES CO.
TD-8810 External ADSL Router User Guide 2 - I.432 ATM physical layer compliant - Supports RFC2364 (PPPoA) - Supports RFC2516 (PPPoE) - Supports RFC2684 (E oA)(Bridged *and Router) - Supports RFC1577 (IPoA) ) Note: “*” Needs the third-party software.
TD-8810 External ADSL Router User Guide 3 1.8 Electric p arameter ¾ Adaptor power Output: 9VAC/0.8A ， 50Hz or 60 Hz ¾ Power consumption: 4W Maximum 1.9 Conventions The Router or TD-8810/TD-8810B, or de vice mentioned in this User guide stands for TD-8810/TD-8810B External ADSL ROUTER without any explanations.
TD-8810 External ADSL Router User Guide 4 Chapter 2. Hardware Installation The TD-8810/TD-8810B maintains three separ ate interfaces, one Ethernet, one ADSL and one power adapter inerface. The Router should not be located where it w ill be exposed to moisture or excessive heat.
TD-8810 External ADSL Router User Guide 5 power for at least three seconds. It will resume the default manufacturer’s setup. ¾ LAN : Connect with your computer’s NIC. ¾ LINE(WAN) : Connect to the MODEM Port of Spli tter or Connecting the telephone line.
TD-8810 External ADSL Router User Guide 6 Chapter 3. System Configuration 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, turn on the power . 2. Change the IP address of your PC （ Figure 3-1 ） : Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.
TD-8810 External ADSL Router User Guide 7 The words in fact may be different with this guide. Remarks: you can check whether your configuration is successful through PING command. Enter Ping 192.168.1.1 If the screen looks like the following, you have been successful.
TD-8810 External ADSL Router User Guide 8 Figure 3-4 Y ou will then see the Figure 3-5, you will see some information such as link rate and so on. Figure 3-5 Default user name and password is “admin”; if you want to change them, please go to “Management” Æ “Access control” Æ “Passwords” changing them.
TD-8810 External ADSL Router User Guide 9 Figure 3-6 3.3 Web Setup Choose “ Advanced Setup ” Æ ” WA N ”, you will enter the page of Wide Area Network (W AN) Setup, you will s ee the Figure 3-7.
TD-8810 External ADSL Router User Guide 10 need, and then click the edit button, you will enter the pa ge of A TM PVC Configuration (See Figure 3-8) Figure 3-8 Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step.
TD-8810 External ADSL Router User Guide 11 Figure 3-9 After choosing the proper protoc ol, enter the correct parameters supported by yo ur ISP. Enable the configurations, then you will go to Internet.
TD-8810 External ADSL Router User Guide 12 Figure 3-10 You will see the Figure 3-11, then turn on the se lected functions according to your demands. Clicking the next button to enter the next step, you w ill see the Figure 3-12, finally click save to complete the configuration.
TD-8810 External ADSL Router User Guide 13 Figure 3-12 ¾ PPP over Ethernet (PPPoE) If you select the protocol of PPP over Ethernet (PPPoE), you will see the Figure 3-13, enter the value of user name and password which is provided by your ISP, after select ing the other function (often using the default setup), click the next button.
TD-8810 External ADSL Router User Guide 14 Figure 3-13 You will see the Figure 3-14, then tu rn on the selected functions acco rding to your needs. Clicking the next button to enter the next step, you will see the Figure 3-15, finally click save to complete the configuration.
TD-8810 External ADSL Router User Guide 15 Figure 3-15 ¾ MAC Encapsulation Routing (MER) If you select the protocol of MAC Encapsulation Routing (MER ), you will see the page(Figure 3-16), Enter the parameter and the way which is provide d by your ISP, then click the next button.
TD-8810 External ADSL Router User Guide 16 the next button to enter the next step, you will see the Figure 3-18, finally click save to complete the configuration.
TD-8810 External ADSL Router User Guide 17 and the way which is provided by your ISP, then click the next button. Figure 3-19 You will see the page (Figure 3-20), then turn on the selected functions according to your needs.
TD-8810 External ADSL Router User Guide 18 Figure 3-21 ¾ Bridging If you select the Bridging protocol, you just open the bridge serv ice function options, you will see the Figure 3-22, then click the next button, you will see the Figure 3-23, finally click save to complete the configuration.
TD-8810 External ADSL Router User Guide 19 Figure 3-23 ) Note: After you complete any setup, the new setup must be saved and the Router must be restarted for the configuration to go into effect. Please click the Save/Reboot button to restart, referring to the Figure 3-24.
TD-8810 External ADSL Router User Guide 20 3.3.1 DHCP IP Reservation When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings.
TD-8810 External ADSL Router User Guide 21 1. Click the Set Address Reservation botton, and the Address Reservation screen pop up, as it showed below ; Figure 3-26 2. Click New Entry botton to add new entries, and the screen sh owed below pop up, you can modify an address reservation entry in this screen; Figure 3-27 3.
TD-8810 External ADSL Router User Guide 22 Figure 3-28 7. Click Save/Reboot button to save the settings and reboot the router. ) Note: The function won't take effect until the router reboots.
TD-8810 External ADSL Router User Guide 23 Figure 3-30 If you select Enable Automatic Assigned DNS , this Router will accept automatically the first received DNS assignment from one of PPPoA , PPPoE or MER/DHCP enabled PVC(s) during the connection establishment.
TD-8810 External ADSL Router User Guide 24 Figure 3-31 To setup DDNS, follow these instructions: 1. Click the Add button (pop-up Figure 3-31), then you will set the DDNS in the next screen (shown in Figure 3-32). Figure 3-32 ) Note: This page allows you to add a Dynamic DNS address from DynDNS.
TD-8810 External ADSL Router User Guide 25 DDNS, you can leave it default. 4. Type the User Name and Passw ord for your DDNS account. 5. Click the Save/Apply button to save the entry. 3.4 Sof tware Dial If TD-8810/TD-8810B CPE work in bridged (RFC 1483 Bridged) mode when it connecting Internet.
TD-8810 External ADSL Router User Guide 26 Chapter 4. Advantage management setup In order to satisfy our customer's needs we offer an excelle nt Web management interface. Feel free to utilize the Advantage application and onli ne software upgrades.
TD-8810 External ADSL Router User Guide 27 Appendix A: FAQ 1. What related parameters are requi red to acquire ISP when you want to access the internet by ADSL Router? 1) Dial user: Connection prot ocol, User name, Password, Va lue of VPI/VCI, Encapsulation mode of AAL5 and so on.
TD-8810 External ADSL Router User Guide 28 3) This product has the PPP dial procedure inside , so you will not need to use the dial software if your protocol is PPPoA or PPPoE, ADSL Modem will connect automatically. 4) You can check whether your ADSL Modem succeeds in connection with PING command.
TD-8810 External ADSL Router User Guide 29 Appendix B: Default Config User name admin Password admin IP Address 192.168.1.1.
TD-8810 External ADSL Router User Guide 30 Appendix C: Contact Information For help with the installation or operation of TP-LINK Product, please visit our website.
An important point after buying a device TP-Link External ADSL ROUTER TD-8810 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link External ADSL ROUTER TD-8810 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link External ADSL ROUTER TD-8810 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link External ADSL ROUTER TD-8810 you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link External ADSL ROUTER TD-8810 will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link External ADSL ROUTER TD-8810, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link External ADSL ROUTER TD-8810.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link External ADSL ROUTER TD-8810. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link External ADSL ROUTER TD-8810 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
