Instruction/ maintenance manual of the product 250-3642 Toyota
Go to page of 2
1994 TOYOTA TRUCK WITH 4 CYL. ENGINE THROTTLE LEVER ADAPTOR PACKAGE 250-3642 1. Remove the throttle shaft nut and lock washer from the throttle shaft. Install the Throttle Lever Bracket. Reinstall the lock washer and hex nut. NOTE: Start the nut by hand to prevent cross-threading.
Connect cruise control cable to the throttle lever using bead chain and the eyelet connector from the cruise kit. Secure the eyelet connector to the throttle lever using the two plain washers and self-locking pin provided in the throttle adaptor kit. See Figure 2.
An important point after buying a device Toyota 250-3642 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toyota 250-3642 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toyota 250-3642 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toyota 250-3642 you will learn all the available features of the product, as well as information on its operation. The information that you get Toyota 250-3642 will certainly help you make a decision on the purchase.
If you already are a holder of Toyota 250-3642, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toyota 250-3642.
However, one of the most important roles played by the user manual is to help in solving problems with Toyota 250-3642. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toyota 250-3642 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
