Instruction/ maintenance manual of the product WL68 Toshiba
Go to page of 28
WL68 Owner's manual TOSHIBA gp g.
? For television operation queries, please ring the helpline… R emember… 2 Contents SETTING UP Safety precautions – Some do’s and don ’ts for you to be aware of 3 Installation and important .
3 Safety P recautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety .
Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady .
Simple at-a-glance reference of your remote control. T ext control buttons To display on-screen information Stereo/bilingual transmissions To exit Menus No function on this model To mute the sound To .
6 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Aerial cables: Connect the aerial to the socket on the rear of the television.
7 Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. A band may appear at the edges of the screen or parts of the picture may be obscured.
8 Controls and input connections If the RED LED is unlit check that the mains plug is connected to the power supply . If the picture does not appear press i on the remote control, it may take a few moments. To put the television into Standby press i on the remote control.
Manual tuning P rog. Channel Station 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 6 C69 Store MENU Back EXIT W atch TV 9 T uning the television using Quick Setup, sorting programme positions Before switching on the television put your decoder and media recorder to Standby if they are connected.
Manual tuning P rog. Channel Station 0 C60 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 OK Select Sort MENU Back EXIT Wat ch TV 1/2 SET UP Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Wat ch TV 4 Pre ss right to select System and use up or down to change if required.
Manual tuning P rog. Channel Station 0 C60 VCR 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 OK Select Sort MENU Back EXIT W atch TV 11 Manual tune continued, P rogramme skip Pre ss MENU and repeat from Step 2 or press EXIT . Each programme position has to be individually selected.
Y ou must allow the television to complete the search. When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed using Manual tuning , see page 9 . To select a programme position use the numbered buttons on the remote control.
When an active Super W oofer is connected to the W oofer Out connection on the back of the television, select AV connection in the SET UP menu, press down to highlight W oofer and using left or right select External . ( See 'Input Selection and AV Connections' section ).
SUBTITLE When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. SUBTITLE Widescreen viewing SUPER LIVE 1 This settin.
15 Widescreen viewing continued 14:9 Use this setting when watching a 14:9 broadcast. Use this setting when watching a widescreen DVD , widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.
PICTURE Picture settings OK Colour management Off Base colour adjustment Active Backlight Control On Cinema mode On Active Vision M100 On MENU Back EXIT Wa tch TV 1/2 SET UP Language English Country U.
17 Picture controls continued DNR enables you to ‘soften ’ the screen representation of a weak signal to reduce the noise effect. DNR – Digital Noise Reduction Select DNR from the Picture settings menu.
Base colour adjustment Hue Saturation Red +2 +6 Green 0 0 Blue 0 0 Y ellow 0 0 Magenta 0 0 Cyan 0 0 Reset OK MENU Back EXIT W atch TV PICTURE Picture settings OK Colour management On Base colour adjus.
FUNCTION Te l etext Auto. P anel lock Off Auto format On Blue screen On Side Panel 1 MENU Back EXIT Wat c h TV The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable.
20 P anel lock, time display , stereo/bilingual transmissions, the timer F rom the FUNCTION menu select P anel lock and choose On or Off using left or right . P anel lock disables the buttons on the television. All buttons on the remote control can still be used.
21 PC settings – picture position, clock phase, sampling clock, reset, PC media windows 3 3 Use left or right to adjust until the picture clears. In the SET UP menu press down until PC Setting is highlighted. Pre ss OK to select, then down to highlight Clock phase .
1/2 SET UP Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT W atch TV Input selection and AV connections 22 Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment.
1/2 SET UP Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Wa tch TV 1/2 SET UP Language English Country UK Auto tuning OK Manual tuning.
The 6 / / 7 button : To view text services press 6 / / 7 . Press again and the screen will split into two sections with the last channel viewed on the left and the text page on the right. Press again to return to normal viewing. P rogrammes cannot be changed until text is cancelled.
Pre ss 6 / / 7 to display text. Press again to view a normal broadcast picture on the left of the screen and text to the right. Press again to return to normal television viewing. P rogrammes cannot be changed until this has been done. To display a page of text: 6 / / 7 For use with P f and P e to view sub -pages when available.
A R emove it by pressing . Why is there a message permanently on the screen? Q i + Below are the answers to some of the most common queries. For more information go to www .toshiba.co.uk A Check the mains switch is on and check all mains connections. Check the television is not in standby mode.
27 Q uestions and A nswers continued A Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide .
Broadcast systems/channels PA L-I UHF UK21-UK69 PA L -B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B- Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input PA L, SECAM, NTSC 3.
An important point after buying a device Toshiba WL68 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba WL68 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba WL68 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba WL68 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba WL68 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba WL68, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba WL68.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba WL68. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba WL68 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
