Instruction/ maintenance manual of the product DX052 Behringer
Go to page of 9
PRO MIXER DX052 Version 1.0 M a r ch 2 0 0 3 Users Manual ENGLISH.
2 PRO MIXER DX052 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 PRO MIXER DX052 DX052 PRO MIXER Professional 2-Channel DJ Mixer with BPM Counter and VCA Faders s Professional 2-channel ultra low-noise DJ mixer with additional mic input s Intelligent dual auto-BP.
4 PRO MIXER DX052 TABLE OF CONTENTS 1 . INTRODUCTION ......................................................... 5 1.1 Before you get started ................................................... 5 1. 1 .1 Shipment ........................................
5 PRO MIXER DX052 1. INTRODUCTION 1. INTRODUCTION Your purchase of the BEHRINGER PRO MIXER DX052 has put you at the forefront of todays trends in DJ mixing consoles. Numerous features, such as the beat counter and XPQ 3D surround effect, enable you to work in completely new and creative ways.
6 PRO MIXER DX052 2. CONTROL ELEMENTS 2.1 Stereo channels 1 and 2 The TRIM control in the CHANNEL section is used to adjust the level of the input signal. Each input channel features a 2-band equalizer ( HIGH and LOW ) with kill characteristic. Thus, the signal can be attenuated to a much greater extent (-32 dB) than it can be raised (+12 dB).
7 PRO MIXER DX052 3. CONNECTIONS crossfade setting is as it was before. Pressed upwards, the switch locks into the reversed position ( HOLD ). To reset it, simply push it downwards. You determine the input signals with the PHONO/ LINE/LINE switches. Phono is intended for connecting a turntable.
8 PRO MIXER DX052 These are the LINE inputs to connect a tape deck, CD or MD player etc. The GND connectors ground the turntables. The DX052 features an integrated effects loop for the connection of an external effects device/sampler. The MONITOR signal is taken at the SEND output and routed, for example, to a reverb processor.
9 PRO MIXER DX052 5. WARRANTY 5. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3.
An important point after buying a device Behringer DX052 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer DX052 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer DX052 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer DX052 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer DX052 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer DX052, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer DX052.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer DX052. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer DX052 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
