Instruction/ maintenance manual of the product DM100 Behringer
Go to page of 2
DISTORTION MODELER DM100 Thank you for showing your confidence in us by purchasing the BEHRINGER DISTORTION MODELER DM100. This high-quality modeling effects pedal provides electric guitars with state-of-the-art distortion sounds of the most legendary pedals.
DISTORTION MODELER DM100 + The DM100 has no on/off switch. As soon as you insert the jack into the IN connector, the DM100 begins running. When not using the DM100, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom.
An important point after buying a device Behringer DM100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer DM100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer DM100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer DM100 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer DM100 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer DM100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer DM100.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer DM100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer DM100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
