Instruction/ maintenance manual of the product DI800 Behringer
Go to page of 8
Version 1.1 June 2004 Users Manual ULTRA-DI P R O DI800 ENGLISH.
2 ULTRA-DI PRO DI800 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 ULTRA-DI PRO DI800 DI 800 ULTRA-DI PRO Professional Mains/Phantom Powered 8-Channel DI-Box s Professional, multi-purpose 8-channel Direct Injection box for stage and studio applications s Converts u.
4 ULTRA-DI PRO DI800 1. INTRODUCTION Thank you for showing confidence in BEHRINGER products by purchasing the DI800. Be it on-stage or in the studio, musicians often look for ways to connect certain signal sources directly to the mixing console.
5 ULTRA-DI PRO DI800 2. CONTROL ELEMENTS 1.1 Before you get started 1.1.1 Shipment Your ULTRA-DI PRO was carefully packed at the assembly plant to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage.
6 ULTRA-DI PRO DI800 3. APPLICATIONS Fig. 2.2: Rear panel connectors The BAL OUT connectors (1 - 8) are the balanced mic- level outputs of the channels 1 to 8. Use a high-quality balanced microphone cable to establish connection. The mains connection is achieved via the standard IEC connector.
7 ULTRA-DI PRO DI800 4. AUDIO CONNECTIONS + Please make sure that your DI800 is installed and handled only by people with enough technical expertise. Assure that those operating the unit during and after the installation are sufficiently grounded. Otherwise, electrostatic charge may alter the performance of your equipment or damage it permanently.
8 ULTRA-DI PRO DI800 6. WARRANTY T echnical specifications and appearance subject to change without notice. The information contained herein is correct at the ti me of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners.
An important point after buying a device Behringer DI800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer DI800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer DI800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer DI800 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer DI800 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer DI800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer DI800.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer DI800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer DI800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
