Instruction/ maintenance manual of the product S2T Toshiba
Go to page of 8
Programmable Controllers Rev 051115 Ethernet Setup for the S2T Ethernet communications with the S2T CPU is done through the GEN651A Ethernet module. Prior to using this module, it must be confi gured using the EtherSetup_E setup software.
Page 2 2.6 Click the Option button. Set the required parameters, then click the Write button to write into GEN651A module. 2.7 Close the EtherSetup_E software. DIP S witches 7 and 8 must be left in the ON position for T-PDS to work through the GEN651A module.
Page 3 Computer Ethernet Card Setup: The computer’s Ethernet card must be setup first. Go to the Control Panel and double click on Network C onnections.
Page 4 T-PDS Setup: In T-PDS under the Option Menu, select Communications. Set as follows: Using T-PDS, set the following in special register SW63: This completes the T-PDS setup. T-PDS can now be connected to the S2E via Ethernet through the GEN651A Ethernet module.
Page 5 UDP/IP Socket Interface: To use UDP/IP transmission, it is necessary to create a small program in the S2T. The program will utilize the SEND and RE CV instructions. The general procedure is as follows: 1. Execute UDP socket open: The Specified Po rt number must be different from the Port number for T-PDS connection.
Page 6 UDP Send: SEND instruction is used. ▬ [ A SEND B ] ▬ A : H3100 (fixed) B : Result status A+1 : UDP send command (H0032) B+1 : Error code A+2 : Socket number (1 to 12) A+3 : Receiver IP addr.
Page 7 UDP Receive: RECV instruction is used, ▬ [ A RECV B ] ▬ A : H3100 (fixed) B : Result status A+1 : UDP receive command (H0033) B+1 : Error code A+2 : Socket number (1 to 12) A+3 : Sender IP .
Page 8 When R0621 is set to ON, 100 data words are received from the sender (IP address = 192.0.0.5, Port number = 5000) and are stored in D2000 to D2099. When the operation is finished, R0621 is reset to OFF automatically. UDP Socket Close SEND instruction is used.
An important point after buying a device Toshiba S2T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba S2T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba S2T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba S2T you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba S2T will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba S2T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba S2T.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba S2T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba S2T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
